| Author |
Topic: Peavey Special 130 issues |
Tom Geldner
From:
California, USA
|
Posted 3 Sep 2017 2:35 pm |
|
I have an old Special 130 with the Scorpion Plus speaker in it. It's loud as hell but I've started having a little weirdness with it. I cleaned the pots with Deoxit -- that seems to have helped a bit. BUT, when the reverb is switched in, the amp loses mid and bass, and it induces hum. It sounds almost sparkly.
There are few people who work on these in San Diego and I don't want to throw a bunch of money at it.
Thoughts?
Also, what do the Ken Fox chip mods do for this?
--Edited with additional info
_________________
Just 6-string lap steel. Mostly I play geetar and sing. |
|
|
 |
ajm
From:
Los Angeles
|
Posted 4 Sep 2017 7:19 am
|
|
You say it messes up when the reverb is......switched in.
I take that to mean that you are using it with the footswitch.
Does it work OK without the footswitch?
Also......Do the other footswitch functions work OK (channel switching, etc)? |
|
|
|
Tom Geldner
From:
California, USA
|
Posted 4 Sep 2017 9:27 am
|
|
Shouldn't have used the term switched. SB as the reverb is faded in. Footswitch use is irrelevant.
_________________
Just 6-string lap steel. Mostly I play geetar and sing. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 5 Sep 2017 8:23 am Special amplifier
|
|
Tom, you may send the chassis only with reverb pan and wiring harness to;
Peavey Service Center
Attn; Repair Assistance
412 Hwy. 80 East
Meridian, MS 39301
Please include a copy of this message and your daytime phone number. Without narrowing down the problem, it could be any connection point, etc.. |
|
|
|
