| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Effect Pedals Power Jack Depth
Reply to topic
Author Topic:  Effect Pedals Power Jack Depth
George Redmon


From:
Muskegon & Detroit Michigan.
Post  Posted 8 Aug 2017 7:25 pm    
Reply with quote

I am having a pedal board built. I'm finding out at age 65, there's more to good music besides a guitar, cord, and amp. But what I'm finding out is that there is such a discrepancy, (internet spell suggestion) in the depth a power plug goes into a pedal? May seem little to you. But I almost sent back a brand new Phase Shifter because I thought the jack on a brand new pedal was bad. Look at how far the power plug sticks out of the jack on my new Big Joe Stomp Box Company Phase shifter pedal. Why so far out? I just know from stage vibration it's going to loose contact. Look at my Subdecay Flanger, fits like a glove. Keith's Legend Delay, just slightly out. But Brad's Earth Drive bottoms right out, like I'm use to seeing. Even my Wilson Wah Pedal sticks out of the jack a tad. Why the differences? Maybe I'm concerned over nothing, but I like a plug to fit tight in a jack.


















View user's profile Send private message
Craig A Davidson


From:
Wisconsin Rapids, Wisconsin USA
Post  Posted 9 Aug 2017 5:27 am    
Reply with quote

If all those pedals are mounted on a board the chances are slim that the power plugs will come out. You should feel them sort of lock in when you plug them in. I have had many kinds and brands of pedals and never had an issue. I would surmise that you are overthinking your project.
View user's profile Send private message Send e-mail Visit poster's website
George Redmon


From:
Muskegon & Detroit Michigan.
Post  Posted 9 Aug 2017 10:48 am    
Reply with quote

Thanks Craig, i was told by the manufacturer that it is a depth mounting thing. Those jacks are mounted by hand, and no 2 people do the same thing the same way. They sent me 5 examples, and all 5 were mounted slightly different. They told me at any time during the life of their product they will send FedEx to pick my pedal up, repair it free, for any manufacturing issues. I was curious more then anything i guess. Thanks
View user's profile Send private message
Randy Schneider


From:
SW New Mexico, USA
Post  Posted 9 Aug 2017 11:39 am    
Reply with quote

Not all DC power plugs/jacks are the same length/depth either.

If you've every shopped for those plugs, they come in not only different inside (pin) and outside (barrel) diameters, they also come in different lengths, and there isn't really a 'standard' length, from what I've seen. If I'm ordering plugs, I try to get a replacement plug that is the same length (or close to) as the original.

Probably better for the plug to be just a tad bit long -- leaving a little sticking out of the jack -- than too short, and not fully inserted. Ideally, it would be 'just right' of course!
View user's profile Send private message Send e-mail
David Gertschen

 

From:
Phoenix, Arizona
Post  Posted 9 Aug 2017 4:49 pm    
Reply with quote

It comes down to wherever the pedal builder happens to source their female power jacks from.

I have noticed this difference in the many pedals I have had, but have never had one come loose, whether the pedal was mounted to a pedalboard or just sitting on the floor.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron