| Author |
Topic: Emmons S-10 tone pot wiring |
Dave Meis
From:
Olympic Peninsula, Washington, USA
|
Posted 5 Jul 2017 10:29 pm |
|
| I found a diagram in a previous post that shows the tone pot and by-pass switch, and the wiring to the jack, but it didn't show the wires from the pup. Anybody have a diagram of that? tia, dave |
|
|
 |
Dave Meis
From:
Olympic Peninsula, Washington, USA
|
Posted 6 Jul 2017 6:35 pm
|
|
| Anyone?? |
|
|
|
Dale Hampton
From:
Missouri, USA
|
Posted 7 Jul 2017 4:28 pm Tone pot
|
|
Sorry for the crappy diagram. I hope this helps.
 [/img] |
|
|
|
Dave Meis
From:
Olympic Peninsula, Washington, USA
|
Posted 7 Jul 2017 5:40 pm
|
|
Dale, Thanks for that! Last night I took it out to the shop and started looking at it, and discovered it has a coil tapped pup in it! The switch on the top deck was the coil selector and NOT the defeat.. whichever coil you chose with the switch went through the tone control.. it's 'always on'. Once I saw that, I understood why the tone pot worked no matter where the switch was.. I just wish he'd told me!  I just wired around it for now, as I don't really need a tone control on a single neck (especially with a tapped coil), but I may hook it up with a separate coil switch. Now the top deck switch is just the coil tap and the tone circuit is disabled. |
|
|
|
