| Author |
Topic: Maurice Anderson Lap Steel |
Tony Oresteen
From:
Georgia, USA
|
Posted 8 Jun 2017 9:26 am |
|
In my quest to track down CDs by Maurice "Reece" Anderson I become aware that Reece used a 12 string lap steel on his album "Steel Playin' Texas Swing" and at many other times.
Does anyone have a clear photo of the 12 string lap steel that Reece used? Who is the maker of his 12 string lap steel?
Here"s a link showing him playing Tiny Bubbles on a double neck lap steel.
http://www.steelc6th.com/extended_c6th.htm
Here he plays a single neck lap steel 12:
https://www.youtube.com/watch?v=ZML6JvPnaUc
Any idea if these lap steels were custom made for him by MSA?
Thanks!
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
 |
Jouni Karvonen
From:
Helsinki, Finland
|
|
|
|
Tony Oresteen
From:
Georgia, USA
|
Posted 8 Jun 2017 10:27 am
|
|
Duh!!! How I missed that I don't know. My Google skills are lacking.
Thanks so much! They look like the ones Reece was playing. Very nicely made.
_________________
Tony
Newnan, GA
Too many guitars, not enough time to play
'72 Sho-Bud 6139, '71 Marlen 210
'78 Fender Stringmaster Quad black
PedalMaster D8 |
|
|
|
Christopher Woitach
From:
Portland, Oregon, USA
|
Posted 8 Jun 2017 2:02 pm
|
|
Yes, he played MSA Superslide, tuned:
1. D
2. B
3. G
4. E
5. C
6. A
7. G
8. E
9. C
10. A
11. F
12. D
I use the same non pedal guitar, same tuning but in Bb6 rather than C6
_________________
Christopher Woitach
cw@affmusic.com
www.affmusic.com |
|
|
|
Dana Duplan
From:
Ramona, CA
|
Posted 8 Jun 2017 3:54 pm
|
|
| I believe he used a Boen steel on that album--was done prior to the MSA guitars being built if my memory serves me right. |
|
|
|
HowardR
From:
N.Y.C.-Fire Island-Asheville
|
Posted 8 Jun 2017 5:05 pm
|
|
| I believe that Dana is correct...... |
|
|
|
