| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Chimes with 3 finger picks?
Reply to topic
Author Topic:  Chimes with 3 finger picks?
Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 19 Apr 2017 3:47 pm    
Reply with quote

I use a thumb pick and 3 finger picks. When I do chimes, I tuck the finger with the 3rd pick and use the knuckle. I do this OK. However, I see players putting that finger with no pick in front of the thumb pick using the pad of the finger to chime.

Any ideas to expand my chimes with the third finger pick on?
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 19 Apr 2017 5:13 pm    
Reply with quote

Karate chop.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Bill Cunningham


From:
Atlanta, Ga. USA
Post  Posted 19 Apr 2017 6:58 pm    
Reply with quote

Tip of the little finger behind the thumb.
_________________
Bill Cunningham
Atlanta, GA
View user's profile Send private message Send e-mail
Bob Hoffnar


From:
Austin, Tx
Post  Posted 19 Apr 2017 7:52 pm    
Reply with quote

I use the nail of my pinky.
_________________
Bob
View user's profile Send private message Send e-mail Visit poster's website
Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 19 Apr 2017 8:02 pm    
Reply with quote

Now there ya go, a couple of good tips. Will try out tomorrow. 👍
View user's profile Send private message Send e-mail
Ian Rae


From:
Redditch, England
Post  Posted 20 Apr 2017 2:39 am    
Reply with quote

There seem to be as many methods as there are bones in the human hand. The most success I've had is Lane's way, which is counter-intuitive as the edge of the palm is quite thick compared to a knuckle.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 20 Apr 2017 8:14 am    
Reply with quote

That's the way I learned it: "palm harmonics".
View user's profile Send private message Send e-mail
Dustin Rigsby


From:
Parts Unknown, Ohio
Post  Posted 20 Apr 2017 8:59 am    
Reply with quote

Lane Gray wrote:
Karate chop.
yup ! "Make he-ya...give more power Danielson"
_________________
D.S. Rigsby
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 20 Apr 2017 9:07 am    
Reply with quote

Palm harmonics here too.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Bill Cunningham


From:
Atlanta, Ga. USA
Post  Posted 21 Apr 2017 9:16 pm    
Reply with quote

I snapped this picture at my gig tonight.

Today during lunch I made my periodic trip to the pistol range. I pinched by pinky finger between the magazine and magazine well while tapping in the magazine. This caused a big blood blister that needed some antibiotic and and a band-aid. Tonight I found that I got an incredible bell like chime by muting with the band-aid off the back of the third joint of my finger!

This is how I usually do it.


_________________
Bill Cunningham
Atlanta, GA
View user's profile Send private message Send e-mail
Wayne Quinn

 

From:
Cape Breton.NovaScotia
Post  Posted 22 Apr 2017 10:57 am    
Reply with quote

Bill if i got to go through all that i dont. think i,ll bother learning chimes. it,s to dangeors Razz
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5,
View user's profile Send private message Send e-mail
GaryL

 

From:
Medina, OH USA
Post  Posted 22 Apr 2017 1:27 pm    
Reply with quote

After I amputated the end of my right ring finger, I learned to do harmonics with my little finger.
_________________
GFI Ultra D-10 keyless
Quilter Steelaire(s)
Telonics rack system, 12"& 15" TT Speakers, Hilton Volume
View user's profile Send private message Send e-mail
Wayne Quinn

 

From:
Cape Breton.NovaScotia
Post  Posted 22 Apr 2017 2:44 pm    
Reply with quote

I do try and do them with my ring finger curled in on my right hand. seems it,s a hit and miss with me . Is there and easier way. /?.
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5,
View user's profile Send private message Send e-mail
Bill Cunningham


From:
Atlanta, Ga. USA
Post  Posted 22 Apr 2017 5:01 pm    
Reply with quote

Wayne Quinn wrote:
Bill if i got to go through all that i dont. think i,ll bother learning chimes. it,s to dangeors Razz


Laughing Laughing Laughing

You got a good point there!
_________________
Bill Cunningham
Atlanta, GA
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 22 Apr 2017 5:06 pm    
Reply with quote

Another vote for palm harmonics.
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 23 Apr 2017 5:58 am    
Reply with quote

How many of you remember how the steel player with Hank Thompson used to "rake" the strings at the 5th,7th and 12th position on the strings doing harmonics? It was a great effect and used on a lot of Hand's recordings.
I have been known to do that on occasion.
View user's profile Send private message Send e-mail
Bill Cunningham


From:
Atlanta, Ga. USA
Post  Posted 23 Apr 2017 7:41 am    
Reply with quote

Erv Niehaus wrote:
How many of you remember how the steel player with Hank Thompson used to "rake" the strings at the 5th,7th and 12th position on the strings doing harmonics? It was a great effect and used on a lot of Hand's recordings.
I have been known to do that on occasion.


Atlanta bass player Wayne Smith's dad Walt, explained that technique to me many years ago. He explained to use the tip of the little finger and cut the nail just long enough to pick the string but still short enough to not stick. I never took the time to perfect it. It is a pretty fast lick.

I am a fan of the "whistling" palm harmonic for Western swing and behind fiddle players but you need the "chime" to get the more widely used E9 style of the past 50 years. No codecention implied, just sayin'. Both styles are great and have their place. YMMV.
_________________
Bill Cunningham
Atlanta, GA
View user's profile Send private message Send e-mail
Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 23 Apr 2017 8:30 am    
Reply with quote

I know there have been a number of threads about chimes, but I am so glad I posted this. Starting to get the pinky involved with the thumb pick and know I have work to do. However, I thought I was as far as I could go and now I see new road map👍

Thanks guys,

Lenny
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 23 Apr 2017 11:50 am    
Reply with quote

Wayne Quinn wrote:
I do try and do them with my ring finger curled in on my right hand. seems it,s a hit and miss with me . Is there and easier way. /?.


Yes. The "karate chop" aka palm harmonics and practice time.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Wayne Quinn

 

From:
Cape Breton.NovaScotia
Post  Posted 23 Apr 2017 5:38 pm    
Reply with quote

Yes Lane i .am going to give it a try that way. .I have seen some guys doing it that way and they make it look real easy. but its like you say . practice practice practice.
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5,
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 23 Apr 2017 6:16 pm    
Reply with quote

Here's the bits to remember, and the principles also apply to all methods of harmonics:
1) keep the contact point as small as possible. Even though the karate chop LOOKS meaty, because it's a curved surface, if you barely kiss the strings, it's a very small point that touches the string. The octave node (twelve frets above the bar) is more tolerant on this point than the other three types of nodes worth hitting (7 and 19 frets above the bar to divide the string in thirds [the harmonic being an octave and a fifth above the bar], 5 and 24 frets above the bar to divide it in quarters [the harmonic being two octaves above the bar], and 4, 9 and two other frets who escape me to divide the string in fifths [the harmonic being two octaves plus a major third above the bar].
2) place whatever part is dividing the string PRECISELY at the node. The octave node is more forgiving than the others, but pure placement of a small point is what makes it ring.

In time, you'll get the hang of the bizarre mental trick of "wherever the bar is, your picking hand will be exactly halfway to the top of the fingers"
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Wayne Quinn

 

From:
Cape Breton.NovaScotia
Post  Posted 24 Apr 2017 4:35 am     Thanks
Reply with quote

Thanks Lane ,for that bit of instruction.like i said i surly will try this method and work at it.
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5,
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 24 Apr 2017 7:20 am    
Reply with quote

Bill,
The way you explain it may work but I just use my thumb pick and the side of my little finger to rake the strings.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron