| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Line 6 POD HD500X Review
Reply to topic
Author Topic:  Line 6 POD HD500X Review
David Spires


From:
Millersport, OH
Post  Posted 10 Apr 2017 11:19 am    
Reply with quote

I went direct on the road from 2004-2011 using the POD XT and XT Pro. It was a requirement of the gig, and it worked out just fine - but I can't say it felt inspiring to play through.

I recently decided to solve some production / crew / gig issues by trying to go direct again. Well, being too cheap to try the Kemper, or the Line 6 Helix, I decided to try the HD500X.

It's clearly better modeling and technology than the XT stuff I used. I don't know that it rivals the Kemper, but I can say that I actually like using it. This thing replaced 3 amps, 1 rack, and 1 pedalboard for me on the road, and it put my entire setup right beside me. It also makes my tones "fly date" ready. If you find yourself in a similar situation, it's $400-$500 street price.

I'm not selling any amps; there are just times when it helps to pick the right tool for the job.

Sincerely,

David Spires
_________________
2021 MSA Legend XL 10&7; Asher Electro-Hawaiian Junior Lap Steel; '79 OMI Dobro 66 w/ Scheerhorn cone and setup; '64 Hand-wired Re-issue Fender Princeton Reverb
View user's profile Send private message Send e-mail Visit poster's website
Bill Ford


From:
Graniteville SC Aiken
Post  Posted 18 Apr 2017 1:33 pm    
Reply with quote

Also has a ton of extra stuff you may,or may not need...good unit. BF
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!!
View user's profile Send private message Send e-mail
Dan Klotz


From:
Houston, Texas
Post  Posted 18 Apr 2017 11:15 pm    
Reply with quote

Thanks David. That's good to know.

I have a Steelaire and I use the direct out frequently.
_________________
2- Rittenberry D10's
Quilter Steelaire. Nashville 400. Session 500
View user's profile Send private message Send e-mail
Steven Welborn

 

From:
Ojai,CA USA
Post  Posted 22 Apr 2017 6:45 am    
Reply with quote

David, so your using the Pod to go direct into PA and
are able to hear yourself as mixed through PA monitors correct?
Do you have any gain control at the Pod?
How many useful amp models ?
Instrument level or line level out?

The Pod may be the ticket for me as I'm not allowed to use an amp in a situation.

thanks
View user's profile Send private message Send e-mail
David Spires


From:
Millersport, OH
Post  Posted 22 Apr 2017 8:50 am    
Reply with quote

Steven,

This is a pretty robust touring operation, so yes - XLR outs to the snake, then we all have custom molded in-ear monitors (and personalized mixes), so I can have exactly as much of me as I need.

I leave my Master volume on it at 100%, so it's always the same level for our monitor and FOH engineers.

How many useful amp models? Well, I guess that depends on what you want! The Fender amps are where the better clean sounds are, in my opinion. I'm using a hybrid I created with a Fender Twin Reverb "head" into a Mesa Boogie 4x12 speaker cabinet emulation. I've had real world experience with a Deluxe Reverb head I have, into my brother's Mesa 4x12... It inspired me to try this.

It's capable of either level, but I would recommend the line level out. It's not particularly "hot", but I don't think they have to gain it up much more than they would a mic on an amp.

I hope that helps,

David Spires
_________________
2021 MSA Legend XL 10&7; Asher Electro-Hawaiian Junior Lap Steel; '79 OMI Dobro 66 w/ Scheerhorn cone and setup; '64 Hand-wired Re-issue Fender Princeton Reverb
View user's profile Send private message Send e-mail Visit poster's website
Tucker Jackson

 

From:
Portland, Oregon, USA
Post  Posted 22 Apr 2017 9:49 am    
Reply with quote

Very cool, David. Do you have a preferred reverb in the POD?

By the way, I use and love the strings you endorse: the Jagwire "David Spires E9th Nickel" set. After trying some other premium brands over the years, I'm back to Jagwire.
View user's profile Send private message Send e-mail
Steven Welborn

 

From:
Ojai,CA USA
Post  Posted 22 Apr 2017 9:54 am    
Reply with quote

sounds good. Your fender/boogie configuration sounds like the ticket to me too.
thanks!
View user's profile Send private message Send e-mail
Steven Welborn

 

From:
Ojai,CA USA
Post  Posted 22 Apr 2017 4:35 pm    
Reply with quote

David, what works best for you ergonomically as a steel player, you set this up on a stand by your side and operate buttons with your hand? I take it you've got pre-sets programed.
View user's profile Send private message Send e-mail
Bill Ford


From:
Graniteville SC Aiken
Post  Posted 23 Apr 2017 3:54 am    
Reply with quote

Steven Welborn wrote:
David, what works best for you ergonomically as a steel player, you set this up on a stand by your side and operate buttons with your hand? I take it you've got pre-sets programed.


Tommy Dodd sells a fixture that mounts to a mike stand/leg, also line 6 has a similar holder.
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!!
View user's profile Send private message Send e-mail
Steven Welborn

 

From:
Ojai,CA USA
Post  Posted 23 Apr 2017 5:58 am    
Reply with quote

Bill, the hd500x looks too large and weighty to me to mount like that.
View user's profile Send private message Send e-mail
Steven Welborn

 

From:
Ojai,CA USA
Post  Posted 23 Apr 2017 7:13 am    
Reply with quote

David or anyone, have you compared this to the Vox Tonelab. I've seen good reviews of it for steel and clean modeling tone. Got a tube too
View user's profile Send private message Send e-mail
Mike Perlowin


From:
Los Angeles CA
Post  Posted 23 Apr 2017 11:50 am    
Reply with quote

Can it be used in conjunction with the Telonics leg mounted MIDI controller? http://www.tpa-az.com/page28.htm
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
View user's profile Send private message Send e-mail Visit poster's website
David Spires


From:
Millersport, OH
Post  Posted 25 Apr 2017 5:40 am    
Reply with quote

The HD500X is essentially pedalboard size, not a bean shape like the earlier PODs, so it won't mount on your steel. I use it as a pedalboard, so it sits on the floor on my right side. It's not worth making some kind of stand for it to me; I just lean over and change patches, or if I'm changing instruments, stand up and use my feet. Yes, I only use presets I've programmed.

Mike, I just don't know if that MIDI controller will work with it. Probably, if you know how to program it, but I'm not a MIDI whiz. It does have a MIDI in and out.

Reverb, well - it's just about what sounds best for what you are looking for... The Plate is nice, and the Hall is nice as well.

This unit is much better than the Vox Tonelab, because the Tonelab came out around 2004, I believe - old technology. The whole point of my post is really saying, "The generation of modeling amps that came out since about 2013 is a ton better than what came before it."

I hope those answers help!

David Spires
_________________
2021 MSA Legend XL 10&7; Asher Electro-Hawaiian Junior Lap Steel; '79 OMI Dobro 66 w/ Scheerhorn cone and setup; '64 Hand-wired Re-issue Fender Princeton Reverb
View user's profile Send private message Send e-mail Visit poster's website
Bill Ford


From:
Graniteville SC Aiken
Post  Posted 25 Apr 2017 5:47 am    
Reply with quote

I misunderstood, thinking Dave was asking about the "bean Shape" pod.

Bill
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!!
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron