| Author |
Topic: Knee Lever spacing |
Lamar Brown
From:
Andalusia, Alabama, USA
|
Posted 22 Mar 2017 12:57 pm |
|
I have a 1974 MSA Classic E9th on a double body. It only had 2 knee levers when I got it. They were on the right side. I have now added the 2 left knee lever on and I am having a problem getting position just right. Is there some measurement or a right way of setting them up to where they are not spaced out so far. I do want to add that I bought both kits from PSGParts.com. Michael does a outstanding job of machine work.
Any help I can get will be greatly appricated.
_________________
1974
MSA ,Steel Guitar, Peavey Session Limited 400, Goodrich Volume Pedal, Boss Digital Delay |
|
|
 |
Ricky Davis
From:
Bertram, Texas USA
|
Posted 22 Mar 2017 1:18 pm
|
|
Need to see a pic of the underneath.
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 22 Mar 2017 4:23 pm
|
|
On MSA, the LKR and its reverser mount on predrilled holes on the rear apron (unless you ordered the optional bracket to mount to the deck). Typically the LKL will go on the second open slot to the left from it; the actual lever attaches to the cross shaft. You'll have options on the LKL, but there's only one option that'll be comfy.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Lamar Brown
From:
Andalusia, Alabama, USA
|
Posted 25 Mar 2017 11:03 am
|
|
Thanks for the info. I will try some experimenting till I have it to fit my old big leg.
Lamar
_________________
1974
MSA ,Steel Guitar, Peavey Session Limited 400, Goodrich Volume Pedal, Boss Digital Delay |
|
|
|
