| Author |
Topic: Peavey ltd |
Stan Scantling
From:
Bangs,Texas
|
Posted 25 Apr 2017 1:28 pm |
|
I have a peavey Ltd old style that keeps blowing fuses . Took to a amp tech said it wasn't worth fixing maybe so . The cab is clean has the old black widow speaker great amp . Looking to find a replacement chassis for it . It's a shot in the dark but you never know .
_________________
Emmons D10 ,fender twin |
|
|
 |
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 25 Apr 2017 1:38 pm
|
|
Don't know who your tech is, and don't care, but he is not in touch with the steel guitar world. A Peavey LTD is one great amp for steel guitar. Unless the chassis has been physically destroyed (badly bent), the electronics are absolutely repairable. A good tech would realize this.
I'd send it to Mike Brown at Peavey for repair. They will call you with an estimate of the repair cost. You'll get top quality repair with no baloney, and it will work like new.
_________________
Best regards,
Mike |
|
|
|
Tom Cooper
From:
Orlando, Fl
|
Posted 25 Apr 2017 2:20 pm
|
|
| +1. My LTD 400 had some crazy resistor cluster f job done on it and my tech fixed it up no problem. It was a mess. He fixes tube or SS and knows how important these old amps are to us steel players. I love my LTD, have neo in it and couldn't be happier. I have a Session with neo also for when I need to leave one at church or something. They are about as close to a twin or standel or something as you can get for the money. I would say find a new tech. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 25 Apr 2017 3:05 pm
|
|
Stan, ship the chassis to Mike Brown and his wizards at Peavey.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Stan Scantling
From:
Bangs,Texas
|
Posted 26 Apr 2017 4:39 am Thanks
|
|
My bad the electronics are bad not the chassis ! I didn't buy it new so I really don't know what someone else has done to it . Thanks for the input I'll send it to peavey . It's my favorite amp .
_________________
Emmons D10 ,fender twin |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 26 Apr 2017 4:59 am
|
|
Let's get some terminology straight, since it sounds like there may some confusion or ambiguity.
The chassis is the metal tray that holds the electronics and the term often includes all the electronics. To remove it, pull the 4 bolts on the top of the amp, unplug the speaker cable, and slide the chassis out of the cabinet out.
Send all that to Peavey. Don't bother shipping the cab and speaker.
If it's blowing fuses, there's likely only one expensive component at fault, and THAT'S unlikely.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Stan Scantling
From:
Bangs,Texas
|
Posted 26 Apr 2017 5:13 am Thanks
|
|
Thanks !
_________________
Emmons D10 ,fender twin |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 26 Apr 2017 5:48 am Peavey LTD
|
|
Our techs will be glad to repair it for you. Send the chassis to;
Peavey Service Center
Attn; Repair Dept.
412 Hwy. 80 East
Meridian, MS 39301
Please include copy of this note and your daytime phone number.
Mike Brown
Peavey USA |
|
|
|
Stan Scantling
From:
Bangs,Texas
|
Posted 26 Apr 2017 9:34 am Ltd
|
|
Thanks Mike that's good to hear . I'll get it to them .
_________________
Emmons D10 ,fender twin |
|
|
|
