| Author |
Topic: Packing Steel Guitar For Shipping - Another Example |
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 24 Mar 2017 9:53 am |
|
This guitar was shipped to me in the case just surrounded by a layer of shipping cardboard. This is the second Williams guitar that was shipped to me this way and both arrived in great shape with no damage to the guitar or case.
Being a bit more concerned about possible shipping damage myself, I shipped this guitar out surrounded by 2" thick sheet foam, the type used as house cladding insulation. You can buy the Dow Corning 4' x 8' for $30 a sheet or get the somewhat less dense 2" thick R-Tech foam sheets from Home Depot for about $17 a sheet. It adds about 6 pounds to the shipping weight of an S-12 guitar and it took just over half a 4' x 8' sheet to enclose this guitar. You can save a lot on weight and foam by just building 8 foam corners or just 2 foam end caps to suspend the guitar case inside the outer packing. I used 2 40" x 40" sheets of industrial double wall cardboard for the outer layer. The cardboard was was bent around a metal straight edge then the bends were hammered down. No cuts were made to the cardboard to form the bends! Some extra towels were added to protect and tighten the guitar fit to the case. Two wood blocks were also added to support the case partition between the guitar and pedal rack.
The guitar and case arrived at the buyer's house unscathed! Overkill? Probably, but it brought me peace of mind as it went on the UPS truck. Not a fast job to pack though as I spent 4 hours doing all the cutting, fitting and taping. (click for larger pics!)
 |
|
|
 |
Ken Boi
From:
Arizona, USA
|
Posted 24 Mar 2017 10:57 am
|
|
Nice job!
Where can you buy the outer wall cardboard sheets? |
|
|
|
Larry Hopkins
From:
Lubbock Texas USA
|
Posted 24 Mar 2017 10:58 am Packing
|
|
I received a peavey amp from Greg,arrived in great condition ,no damage,you know how to pack them Greg,good job!
LH
_________________
,peavey renown 115,Vegas 400, Peavey envoy, peavy bandit 65 head,baby bloomer
2 -Nashville 400, Emmons SD-10 legrande lll ,Emmons Black Rock ,sho-bud pac a seat,,Jackson Madison 63; |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
|
|
|
Daniel Morris
From:
Westlake, Ohio, USA
|
Posted 24 Mar 2017 12:05 pm
|
|
Thanks for the tips, Greg.
Late last year, I needed to ship two pedal steels. One was sold, the other (my Kline) was to be modified by the superb Joe Kline.
I also found it worthwhile to buy sheets of foam. Turns out a bicycle box from the FedEx store worked well, but you did some nice work!
Plus I've long wondered just where to find corners for shipping.
_________________
1979 MSA U12 Pedal Steel
1982 Kline U12 Pedal steel
2019 Sierra U12 Pedal Steel
2011 Bear Creek MK Weissenborn
Milkman 40W Mini amp w/Telonics 15" speaker.
Dr. Z Surgical Steel w/TT 15" speaker.
Frenzel MB-50 head.
Spaceman, Empress, Eventide, Pigtronix. |
|
|
|
J R Rose
From:
Keota, Oklahoma, USA
|
Posted 24 Mar 2017 1:29 pm
|
|
That is a GREAT job Greg but I still ask how does a package handler, man or woman, (we have both) pick this up to move around. Just a BIG OLD BEAR HUG. I think some kind of strap with a handle would help out. J.R.
_________________
NOTHING..Sold it all. J.R. Rose |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 24 Mar 2017 2:04 pm
|
|
That's a great idea but I always try to ship my guitars with handle out as J.R. stated, it gives them a place to pickup, usually keeps guitar is same position and makes much easier to handle. These little gals drive those trucks too and they can't bear hug a package that big and heavy. Most have dollys but if they don't, they probably wind up just rolling out of truck.
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 24 Mar 2017 2:33 pm
|
|
| This weighed just under 70 pounds packed. Ups handles up to 150 pounds. Handle sticking out is nice but you at the mercy of the handler to use it. ANY packaging can get a fork lift truck fork through it! |
|
|
|
Don R Brown
From:
Rochester, New York, USA
|
Posted 24 Mar 2017 7:36 pm
|
|
| Greg Cutshaw wrote: |
| Handle sticking out is nice but you at the mercy of the handler to use it. |
You're at the mercy of the handlers on the whole process. I don't think there is anything that's 100% foolproof but I like the idea of the handle being available for their use. |
|
|
|
Sonny Jenkins
From:
Texas Masonic Retirement Center,,,Arlington Tx
|
Posted 25 Mar 2017 7:37 am
|
|
A good source of cardboard in large pieces are Body Shops,,,,replacement automobile panels come in large box packaging. Make end caps and then wrap the body,,,bending with the grain of the cardboard.
We've all seen the horror stories here on the forum,,,,but then I've also seen how some of the items I've received were packaged,,,,some I'm amazed they survived at all. |
|
|
|
