Questions on a George L pick-up

Ron Paslay · From: Georgia, USA

This is on my modified use-to-be Sho~Bud. One wire come loose, black, and a poor soldering job on the other so I took it out to clean up and redo.
Questions on a George L pick-up.
1. What model?
2. Was it hooked up right (see photo with out-put)
3. Is there a use for the second line and what would it be.
4. Should the underside be shielded or insulated in someway.
5. Whoever put this in, on the line not being used, it was twisted together (inner wires) taped and left hanging. Good or notâ€¦
Thanks. Ron

Ian Worley · From: Sacramento, CA

Ron, that's a model "10-5". It has separate taps for the two coils so you can combine them differently for different tones. I have one in my BMI, I just leave it on the generic humbucker setting.

There is a discussion from a while back here: http://bb.steelguitarforum.com/viewtopic.php?t=245255

Ron Paslay · From: Georgia, USA

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: