Black Emmons Formica & Aluminum strips for front apron

L. M. English · From: Augusta, GA, USA

Thanks Jerry, Let me know what to send you for the mica, my trim was put on with a bend down at both ends of the guitar. On the changer side, its about a 16th of an inch low the middle of the trim is perfect, on the keyhead side its about an 8th of an inch down. The upper and lower both have the same shape. It looks like someone put the mica on cut with a sag at both ends and forced the trim to match. Thanks, L.M.

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: