| Author |
Topic: Mode switch selection problem on Steelaire Amp |
Warren Johnston
From:
Blenheim New Zealand
|
Posted 25 Feb 2017 2:10 pm |
|
My Steelaire has developed a problem with the mode switch.
If I carefully move the switch between ch1 and ch2 it will make a connection,( the light will flash).It appears that the problem us in the switch because the connection is lost when I let go the switch.
I have tried moving the switch back and forward through its range but this has'nt helped. It is 2&a1/2 years old.
Have any other Steeelaire owners had this problem or can any tech savvey members offer any suggestions.
Thanks for any comments.
Warren Johnston.
_________________
Carter Universal,Quilter Steelaire combo,
Zoom MS50G. |
|
|
 |
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 26 Feb 2017 7:11 am
|
|
I had that problem. It appears they got some bad switches. They quickly replaced the whole head, no questions asked. I was not the original owner and the unit was out of warranty. They never asked,just wanted to make it right.
Hit them up with a call or email, and they will fix you up. I was very pleased with the customer service.
Let us know how it works out. I think you will be happy with the response. |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 26 Feb 2017 8:14 am
|
|
| Customer support at Quilter is terrific- |
|
|
|
