| Author |
Topic: nv1000 |
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 21 Feb 2017 1:04 pm |
|
anyone still using a nv1000? what speaker? and what reverb tank? any way to check the tank i replaced the cables.even at 10 cant hear the reverb. i checked the tank cant see any problems dont have another peavey tank to change out to try.thanks in advance. will be using my twin with jbls soon.
_________________
Mike Bowles |
|
|
 |
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 21 Feb 2017 5:02 pm
|
|
The speaker that is recommended is the 1501-4 ohm shallow basket Peavey Black Widow which is available through your authorized Peavey dealer or through tjhe factory parts department by calling 1-877-732-8391, ext. 1386.
The reverb problem could be reverb cables, tank or the reverb circuit. You may send the chassis, reverb pan and/or cables. Send to;
Peavey Service Center
Attn; repair department
Meridian, Ms 39301.
Include phone number. |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 22 Feb 2017 8:23 am nv1000
|
|
thanks mike my speaker is ok i replaced the cables i guess next is the pan. my 1000 is a fine amp lot better amp than i am a player thanks again.
_________________
Mike Bowles |
|
|
|
Jim Park
From:
Carson City, Nv
|
Posted 22 Feb 2017 8:47 pm
|
|
Mike,
I use a NV1000 with a Telonics 15 speaker and a Belton reverb tank 17" with a long delay and it sounds great |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 23 Feb 2017 3:42 pm nv1000
|
|
thanks jim might give it a try
_________________
Mike Bowles |
|
|
|
