| Author |
Topic: 67-68 Emmons S-10 $2000 |
Jason Duguay
From:
Massachusetts, USA
|
Posted 12 Feb 2017 9:19 pm |
|
Serial number 1077 S , 6 pedals 2 knee levers. This guitar needs a little work but its a good one. One knee is Emmons and the one is home made. I believe it was converted to E9 from C6. A nice little bonus is that it comes with 12 extra original bell cranks. Pedals 2, 3, and 4 are standard Emmons 5 lowers string 2, and pedal 6 lowers the E's.RKR Lowers E's as well.The case is original and in great shape. I doubt this guitar was gigged very much if at all. I am looking at the pictures and wanted to note that all the pedal rods are included,
Thank you,
Jason
_________________
Ralph. Mooney.
Last edited by Jason Duguay on 17 Feb 2017 5:52 pm; edited 2 times in total |
|
|
 |
Don Hemmer
From:
Krum TX USA
|
Posted 13 Feb 2017 3:14 am Emmons
|
|
| Hi Jason PM and email sent |
|
|
|
Jason Duguay
From:
Massachusetts, USA
|
Posted 17 Feb 2017 5:53 pm
|
|
Trip to the top.
_________________
Ralph. Mooney. |
|
|
|
Jason Duguay
From:
Massachusetts, USA
|
Posted 22 Feb 2017 12:48 pm
|
|
Sold pending,
Thank you,
_________________
Ralph. Mooney. |
|
|
|
Drew Pierce
From:
Arkansas, USA
|
Posted 23 Feb 2017 2:03 pm
|
|
FWIW, I've got 1075 S and it's a bolt-on. I've always understood my guitar was likely from '67 or possibly late '66. But this cut-tail changer guitar being only two digits later makes me wonder. I've also understood the S-10 serial numbers do not necessarily correspond with the D-10 guitars in terms of chronology. And maybe not even with one another?
Whatever. This is a nice, if a little odd setup, guitar. I'm sure it will make a dandy.
_________________
Drew Pierce
Emmons D10 Fatback, S10 bolt-on, Zum D10, Evans RE500, Hilton volume and delay pedals. |
|
|
|
