| Author |
Topic: Pedal bracket |
Rich Upright
From:
Florida, USA
|
Posted 27 Jan 2017 8:08 pm |
|
I don't know if something like this exists, but here is what I am looking for. I have an Emmons pedal; the kind with the pin that goes into the pedal bar hole, and the 2 feet that rest on the 2 "tongues" that are mounted on the bracket. My Mullen does NOT have the hole drilled, nor the 2 "tongues" mounted to it. Is there an adapter that will let you use the Emmons pin pedal on a steel that is NOT drilled or set up for it? Seems like I saw one once.
_________________
A couple D-10s,some vintage guitars & amps, & lotsa junk in the gig bag. |
|
|
 |
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 28 Jan 2017 10:46 am
|
|
Rich, Mullen makes a clamp on pedal bar bracket with no holes in the pedal bar required but I don't know if it can be adapted to fit an Emmons pedal. It seems to me the logical solution would be to trade the Emmons pedal for a Goodrich or maybe sell it and buy a Hilton or Goodrich pedal from me. 
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 29 Jan 2017 7:25 am
|
|
| I bought one of the Mullen brackets and it wouldn't fit my Zum. |
|
|
|
