| Author |
Topic: Need source for Aluminum Spacers for Emmons P/P |
Jack Stanton
From:
Somewhere in the swamps of Jersey
|
Posted 30 Jan 2017 10:30 am |
|
Looking to stock up on a few different sizes, but particularity need 8 of the really small ones that go between the pickup and the mounting plate.
Thanks! |
|
|
 |
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 30 Jan 2017 11:26 am
|
|
Jack,
Some steelers just use surgical tubing or short springs. |
|
|
|
Larry Moore
From:
Hampton, Ga. USA
|
Posted 30 Jan 2017 1:31 pm Spacers
|
|
| Home Depot or Lowes |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 30 Jan 2017 2:07 pm
|
|
I found them at an Ace Hardware here in town. They had plenty but get out your pocket book, lOL
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Jack Stanton
From:
Somewhere in the swamps of Jersey
|
Posted 30 Jan 2017 2:15 pm
|
|
| Tries HD as well as Lowes, plus two local hardware stores, no dice. |
|
|
|
Jerry Jones
From:
Franklin, Tenn.
|
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 30 Jan 2017 3:46 pm
|
|
No experience here, but looks pretty good. US mfg., no minimum order, several payment methods, return policy, wide selection...even have threaded spacers if you want to build pedal rod extenders...and there's a phone number.
...'course you need to know what sizes you want. http://www.aluminumspacers.com/ |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 31 Jan 2017 7:31 am
|
|
| Not sure why you would drill out #4 Jerry when #6 is available w/o drilling? |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 31 Jan 2017 8:04 am
|
|
Jack, send me a PM with your address and I'll send you some.
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
Jerry Jones
From:
Franklin, Tenn.
|
Posted 31 Jan 2017 9:37 am
|
|
| Jim Palenscar wrote: |
| Not sure why you would drill out #4 Jerry when #6 is available w/o drilling? |
I was referring to rod spacers and trying to eliminate the .015 of slop. Seems like I had an older Emmons that had smaller I.D. spacers. Maybe No.5 which would work perfectly with 1/8" rods. I hold No.4 spacers in a tool makers vise for drilling. The No.6 spacers would work fine for the pickups.
_________________
Jerry Jones |
|
|
|
