| Author |
Topic: Eminence 10" |
Kevin Quick
From:
Sacramento
|
Posted 18 Jan 2017 9:41 am |
|
| anyone have a recommendation for which 10" Eminence speaker would be the best for steel? |
|
|
 |
Mike Archer
From:
church hill tn
|
Posted 23 Jan 2017 12:32 pm me too
|
|
I would like to know that also I have a line 6
with 2 10s wonder what be a good steel speaker
mike
_________________
Mullen g2 d-10
Quilter 112
Tele/ fender deluxe |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 23 Jan 2017 2:00 pm
|
|
If you actually play the back neck of yer D10, I doubt you'll be happy until you have 4 10s.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Godfrey Arthur
From:
3rd Rock
|
Posted 23 Jan 2017 9:11 pm
|
|
If you're just needing one, the Copperhead looks like something to try. 75 watts, tight Xmax and peak in the 2k string range. Higher resonance than the Ragin Cajun or the Lil' Buddy though at 105hz. 8 ohms.
If you need 2x10 on any of the above speakers, make sure your amp does 4 ohms for parallel otherwise you'll be doing 16 ohms in series which will decrease your volume out of the amp.
But you might want that...
http://www.eminence.com/pdf/Copperhead.pdf
As with any speaker you need to try them out to see what works for you and in which cabinet type it will be used.
_________________
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7 |
|
|
|
Tom Campbell
From:
Houston, Texas, USA
|
Posted 24 Jan 2017 7:38 am
|
|
| Anyone have experience using the "Copperhead" for steel guitar? I have a Crate bass amp with a 10" speaker that I use for practice (bedroom). It's OK, but, I am looking for a little more latitude (frequency range). |
|
|
|
Mike Archer
From:
church hill tn
|
Posted 24 Jan 2017 7:55 am 10s
|
|
I do play c6 and I wouldnt use 10 inch speakers for c6 neck on steel guitar
however I needed a better set of 10s for my guitar amp which has old speakers in it which I might play a little e9 through
just a thought on my part
mike
_________________
Mullen g2 d-10
Quilter 112
Tele/ fender deluxe |
|
|
|
Dustin Rhodes
From:
Owasso OK
|
Posted 24 Jan 2017 8:42 am
|
|
| A well made 10" can have just as much bottom and be less directional than a 15". Don't confuse tradition with physics. |
|
|
|
Mike Archer
From:
church hill tn
|
Posted 24 Jan 2017 9:51 am yes
|
|
well I guess that's true
some bass amps are great with 10s in them
_________________
Mullen g2 d-10
Quilter 112
Tele/ fender deluxe |
|
|
|
