| Author |
Topic: Is there a mini-mixer with indv. send & return per channel? |
David Mason
From:
Cambridge, MD, USA
|
Posted 6 Jan 2017 9:56 pm |
|
| I don't know if this even exists, but I'd like to find a "little" 8 or 10-channel mixer where each channel has it's own send & return jacks. Big mixers do, but the smaller Samson, Peavey, Behringer mixers all sum the "returns" together. It's to control a looping rig, (loop the loop) and it would work a LOT better if it exists. There are "switchers" to route effect pedals around, but they don't have volume or pan controls. |
|
|
 |
Robert Parent
From:
Gillette, WY
|
Posted 7 Jan 2017 5:36 am
|
|
I have not looked at mixers of late. In the past there were several that had insert points on each channel. While not exactly what you are asking for they may provide a solution.
Robert |
|
|
|
Scott Duckworth
From:
Etowah, TN Western Foothills of the Smokies
|
Posted 7 Jan 2017 5:43 am
|
|
A lot of small mixers have dual circuit I/O 1/4" jacks on each channel. Input and out put on the same jack, sharing a common ground. I tried running my volume pedal and effects that way, but didn't like it.
It uses a cable setup like this... can be had from most larger music stores...
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus! |
|
|
|
