| Author |
Topic: reinstalling a supersustan pickup in an older MSA |
Fred Welch
From:
Sheridan, MI. USA - deceased
|
Posted 3 Dec 2016 1:13 am |
|
There are three places to lock down the pickup, two on the back one on the front. I can't get the front anjustment to seat righ and not end up with part of the spring on top where only the screw should be. What am I doing wrong, Can someone help ......
I have pictures, dont know how to put them on here 
fred |
|
|
 |
Butch Pytko
From:
Orlando, Florida, USA
|
Posted 3 Dec 2016 7:04 pm
|
|
Fred, if I understand you right, here is a picture and how I installed the front height adjustment bolt on my MSA Vintage XL 1978.
On my guitar, there was a washer under the single front bolt head and on top of the spring. That washer is to hold the spring in place. When I placed that single front bolt into the neck slot, I used a small electronic's type flat head screw driver, between the bolt head and the washer--pushing down on the washer, so I could slide the bolt head on top of the neck slot and the washer going underneath the neck slot. Hope this helps. |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 4 Dec 2016 7:56 am
|
|
Right. The two springs on the changer side push up from the deck, and the one on the neck side pushes down, and the washer is fairly important. Not essential, but a real pain without it.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Fred Welch
From:
Sheridan, MI. USA - deceased
|
Posted 4 Dec 2016 1:41 pm fix for msa pickup install please ciose thanks guys
|
|
| great advice |
|
|
|
