| Author |
Topic: Zane on Pro Bender Dobro from Jackson |
Zane King
From:
Nashville, TN
|
Posted 27 Nov 2016 9:30 am |
|
Here is a rough little sample of the Pro Bender device from Jackson Steel Guitars on my Gibson Dobro. Here I use an E tuning and the device raises up 3 strings. This takes the Open E tuning from the 1 chord (E) to a 4 chord (A). Obviously, this has two great purposes immediately. The first one is the fact that you can now play in a "pedals down" position. For those Steel players, you know exactly what I mean by this. So now for example you have a C position on your Dobro not only at the 8th fret open but also now at the 3rd fret with the lever engaged. That clearly opens up a whole new dimension for the instrument. Secondly, you are now able to get those moving notes like a "steel guitar" because you can work the lever just like a floor pedal. Check this out and be sure to watch my right hand/wrist work that pedal. I use it constantly.
https://www.youtube.com/watch?v=7uUpth2aFsY&feature=youtu.be
_________________
Zane King
Email: zaneking@me.com |
|
|
 |
Will Brown
From:
Oklahoma, USA
|
Posted 27 Nov 2016 5:56 pm dobro bender
|
|
| Zane how would it work for regular tunning G B D G B D how would you set it for this tunning does it just bend the 3-6 string or can it be set to bend more then I or 2 strings thanks |
|
|
|
Zane King
From:
Nashville, TN
|
Posted 27 Nov 2016 6:04 pm
|
|
It can work on a G Tuning but it does put a lot more pressure on the cone. Ideally, you want to raise the Bs and Ds. Just give David Jackson a call and he can advise you on what is best.
_________________
Zane King
Email: zaneking@me.com |
|
|
|
Larry Dering
From:
Missouri, USA
|
Posted 29 Nov 2016 6:36 pm Super cool
|
|
| Zane, Pretty wicked stuff. I love it. |
|
|
|
Sonny Jenkins
From:
Texas Masonic Retirement Center,,,Arlington Tx
|
|
|
|
