| Author |
Topic: Using effects |
Jack Hargraves
From:
Missouri, USA
|
Posted 22 Jul 2016 9:26 am |
|
I have a GFI S-10 W/PAd, a Nashville 112 amp and a Deltafex, which I use for a little bit of delay. I currently go from the steel to the Volume pedal, from the V.P. to the High gain on the amp. Then I plug the Deltafex into the post EQ patch on the amp. Does anybody have any suggestions as to how I should do this? or is this the correct way. Your input would be appreciated as always. Jack
_________________
GFI Expo SD10, Nashville 112, Steelers choice Pak-a- seat, Carter vol. pedal, Stage one vol. pedal, Peavey Deltafex. Goodrich volume pedal. |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 22 Jul 2016 11:51 am
|
|
If you're gonna use the overdrive/fuzz/distortion aspects of the Deltafex, you will probably want it before the volume pedal.
If you're gonna use the reverb aspects, the way you're doing it is great.
I like to put everything but reverb before the volume pedal, and the reverb last.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Bobby Snell
From:
Austin, Texas
|
Posted 22 Jul 2016 6:48 pm
|
|
| Using the post-EQ patch is correct, IMHO, if you are just using the Deltafex for delay. |
|
|
|
Jack Hargraves
From:
Missouri, USA
|
Posted 23 Jul 2016 8:13 am
|
|
Thanks Lane and Bobby for the info. I'm glad to know I'm on the right track.
_________________
GFI Expo SD10, Nashville 112, Steelers choice Pak-a- seat, Carter vol. pedal, Stage one vol. pedal, Peavey Deltafex. Goodrich volume pedal. |
|
|
|
