| Author |
Topic: Emmons Pedal bar ,ENDS. |
Raymond White
From:
Georgia, USA
|
Posted 12 Jul 2016 9:53 am |
|
| I Need A Pair(2) Pedal bar End Connectors,For Emmons Pedal Bar,The Part That Connects the Pedal Bar To The LEGS,Thanks, Ray White,steelmanplayer@yahoo.com. |
|
|
 |
Paul Norman
From:
Washington, North Carolina, USA
|
Posted 13 Jul 2016 8:42 pm
|
|
If you are talking about the flat slotted part, there is a wide or narrow. Try Emmons or a Emmons dealer. Steel guitars east. Billy Knowles.
E or F in diagram.
 |
|
|
|
Paul Norman
From:
Washington, North Carolina, USA
|
Posted 13 Jul 2016 8:45 pm
|
|
| You may have to get a Machine shop to make them for you. |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 14 Jul 2016 1:51 am
|
|
I think Mike Cass is the only one you can get Emmons factory parts from now.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
Billy Knowles
From:
Kenansville, N. C. 28349 usa
|
Posted 14 Jul 2016 7:09 am Emmons
|
|
Chris
Your information is incorrect. I picked up close to $1,000 in pickups and Emmons parts at the factory last week. Also I know Lynn Stafford still ordered parts from the factory.
_________________
Billy Knowles
STEEL GUITAR EAST
Emmons authorized dealer and approved service technician
my web site: http://www.steelguitareast.com |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 14 Jul 2016 7:33 am
|
|
Long live, Emmons!!  |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 14 Jul 2016 8:22 am
|
|
Raymond, please make it clear what parts you need. Do you need the pedal bar end pieces that fit onto the legs or do you need the sliding fixture that clamps the leg with the wing nut?
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 14 Jul 2016 2:18 pm
|
|
Billy, sorry.
Go ahead and send him the rack ends, then.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
