| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Putting things together...
Reply to topic
Author Topic:  Putting things together...
Kjell Ohlsson

 

From:
Mora, Dalecarlia, Sweden
Post  Posted 4 Mar 2016 2:35 am    
Reply with quote

Together with my Emmons D10 I´m using a Hilton vol.ped, a Tubefex, Boss RV3 and a Twin Reverb 65 Reissue, sometimes a Fender Steel King. To get the most and the best out of it, in what order would you suggest to put them together? Yes, I´m using the tubes within the Tubefex.
I would appreciate if you will come up with suggestions.
BR
Kjell
_________________
Black Emmons L LGII D10 9+6,BOSS RV3, TubeFex, Fender Steel King, Hilton & Goodrich vol.ped, Fender 60th Anniversary Telecaster, Fender Twin Reverb 65 ReIssue, Volvo V70,
View user's profile Send private message Send e-mail
Brett Lanier

 

From:
Hermitage, TN
Post  Posted 4 Mar 2016 4:40 am    
Reply with quote

I'd go with the Goodrich pedal, RV3, Twin, in that order. Maybe use a small amount of reverb, or delay, from both the RV3 and the twin since neither are stellar.
View user's profile Send private message Send e-mail Visit poster's website
Ian Rae


From:
Redditch, England
Post  Posted 4 Mar 2016 5:01 am    
Reply with quote

Does the Twin have an Fx loop? My Fender 112 does, and I prefer to finish the guitar tone shaping before applying reverb (on the grounds that a hall doesn't have tone controls!)
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website
Jon Light (deceased)


From:
Saugerties, NY
Post  Posted 4 Mar 2016 5:34 am    
Reply with quote

Personally, I would want to simplify the chain. With reverbs and delays in the Tubefex and reverb in the TR, I would at least lose the RV3.

If you have truly chosen these pieces and intend to use them all, I think I'd go in exactly the order that you listed them.

BTW, I know one player who really digs using a little hall reverb combined with a little TR reverb. But his Hall is from a Holy Grail and his TR is a vintage BFTR.
View user's profile Send private message Visit poster's website
Brett Lanier

 

From:
Hermitage, TN
Post  Posted 4 Mar 2016 5:38 am    
Reply with quote

No effects loop in a twin, or any other classic fender amp. But the reverb circuit is after the tone stack.

Sometimes when you're at home you can get a little crazy adding this and that, 2 reverbs, extra buffer, etc and it might sound arguably better in your home... but what often sounds the best live in the mix of a band is a simpler setup with less electronics between the guitar and speaker.

I would use the rv3 over the tubefex for simplicity sake.
View user's profile Send private message Send e-mail Visit poster's website
Lane Gray


From:
Topeka, KS
Post  Posted 4 Mar 2016 7:29 am    
Reply with quote

I also vote for guitar, volume pedal, amp.
If you MUST use the tubefex, put it after the volume pedal. The RV3 only when using the Steel King, since the Twin has a great sounding reverb.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Jim Palenscar

 

From:
Oceanside, Calif, USA
Post  Posted 4 Mar 2016 7:37 am    
Reply with quote

My preference is to use effects out of the guitar b4 volume pedal when don't have effects loop so they see the full signal all the time.
View user's profile Send private message Send e-mail Visit poster's website
chris ivey


From:
california (deceased)
Post  Posted 4 Mar 2016 9:15 am    
Reply with quote

finally, a credible person supports what i have always done!
View user's profile Send private message
Lane Gray


From:
Topeka, KS
Post  Posted 4 Mar 2016 9:25 am    
Reply with quote

Indeed, Jim. And I plead just having woken up. Reverb after, everything else before. Although I've had a few cheaper stomp boxen that didn't like the hotter signal from a steel pickup. They went between pedal and reverb
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Rich Upright


From:
Florida, USA
Post  Posted 4 Mar 2016 12:14 pm    
Reply with quote

Not familiar with Tubefex, but I have an RV3 & a DD3, and I find that after the pedal is best 'cause it won't decay when you back off.

My compressor & overdrive (for regular guitar) comes before the pedal & the A-B switch.
_________________
A couple D-10s,some vintage guitars & amps, & lotsa junk in the gig bag.
View user's profile Send private message Send e-mail
Kjell Ohlsson

 

From:
Mora, Dalecarlia, Sweden
Post  Posted 7 Mar 2016 2:25 am    
Reply with quote

Thanks a lot guys,
I´ve got a lot of thoughts from you and I really appreciate it. I guess I don´t have to use all of my equipment.
BR
Kjell
_________________
Black Emmons L LGII D10 9+6,BOSS RV3, TubeFex, Fender Steel King, Hilton & Goodrich vol.ped, Fender 60th Anniversary Telecaster, Fender Twin Reverb 65 ReIssue, Volvo V70,
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron