| Author |
Topic: 2008 Mullen Black SD10 4x6 For Sale |
Gerry Cockrell
From:
Buffalo Gap, Texas
|
Posted 10 Feb 2016 9:28 am |
|
I bought this guitar from a fellow forumite in 2011. It is finished in black mica and has two broad mother of pearl inlay strips on the front of the body. Guitar has full polish job. Height is currently 1" over standard. Pickup is BL705. Setup is Emmons. Franklin Pedal is at "0" position. It has two LKL levers. The front LKL lever raises string 7 to G#. Rear LKL raises E's. LKR lever lower E's. LKV lowers B's to Bb. RKL raises string 1 to G#; raises string 2 to E; and lowers string 6 to F#. RKR lowers string 2 to D/C#; raises string 7 to G#; and lowers string 9 to C#. Tunable splits are on strings 5, 6, and 10. Guitar case has wheels on one end and a handle added to end opposite from wheels. Price is $2,995 delivered to Dallas Steel Guitar Jamboree in March or will meet buyer within 150 miles of Abilene, Texas to deliver guitar. Will ship guitar only to lower 48 states for $125 more ($3,120).
Last edited by Gerry Cockrell on 10 Feb 2016 10:48 am; edited 1 time in total |
|
|
 |
Jim Stanley
From:
Perry, Georgia, USA
|
Posted 10 Feb 2016 10:34 am Mullen G2
|
|
| I'm interested and had a couple questions....Email sent. |
|
|
|
Gerry Cockrell
From:
Buffalo Gap, Texas
|
Posted 10 Feb 2016 10:57 am
|
|
| Post edited to correct LKR change. That lever lowers the E's. |
|
|
|
Bill Lowe
From:
Connecticut
|
Posted 10 Feb 2016 11:40 am
|
|
Super Deal!!!!
_________________
JCH D10, 71 D10 P/p fat back, Telonics TCA 500C--12-,Fender JBL Twin, Josh Swift signature. |
|
|
|
Gerry Cockrell
From:
Buffalo Gap, Texas
|
Posted 10 Feb 2016 11:55 am
|
|
| Thanks, Bill. |
|
|
|
Jerry Sherbahn
From:
Georgetown, Tx
|
Posted 10 Feb 2016 2:43 pm steel
|
|
| I've got a Mullen just like this one, best steel I've ever had and I've had a few since 1966. Best pedal action of any steel out there |
|
|
|
Joey Gaskins
From:
New Bern, North Carolina, USA
|
Posted 10 Feb 2016 6:07 pm Mullen
|
|
| Wow if I had a buyer for my Strayhorn era Emmons I'd jump on this. |
|
|
|
David Fleming
From:
Texas, USA
|
Posted 10 Feb 2016 8:06 pm
|
|
| Hey, Gerry! Wally Moyers and I visited about you a couple of days ago. If I hadn't have gotten a D-10 G2 about two weeks ago, I would have that guitar. That's a great guitar at a great price! BTW, my sister lives in Buffalo Gap so I'm there from time to time. Let's swap licks sometime! Good luck with your sale! |
|
|
|
Gerry Cockrell
From:
Buffalo Gap, Texas
|
Posted 10 Feb 2016 9:06 pm
|
|
| Thanks, David. Wally mentioned you to me. Maybe we will run into each other soon. |
|
|
|
John Goux
From:
California, USA
|
Posted 11 Feb 2016 12:57 am
|
|
I have a question.
When the height is 1" over standard, how high are the strings off the floor? (Inches)
What is involved to change the height?
John |
|
|
|
Mickey Adams
From:
Bandera Texas
|
Posted 11 Feb 2016 6:45 am
|
|
John, the legs and pedal rods have to be cut down to length...
Gerry, I have a potential buyer..I emailed him, awaiting reply..
_________________
ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders! |
|
|
|
Gerry Cockrell
From:
Buffalo Gap, Texas
|
Posted 11 Feb 2016 8:56 am
|
|
| Mickey, you know much more about all of this than I do, but at least with this guitar, the legs don't have to be cut down. The 1" spacers or extensions inside the guitar legs , and the two pedal bar spacers on the outside of the front legs can be removed. That will bring the guitar down to standard height. Then the pedal rods have to be cut down, as you said, or new standard length purchased. If you will recall, when I first acquired this guitar, it was 2" over standard height, and you lowered it for me to current 1" over. Hope all is well with you. |
|
|
|
Dave Mudgett
From:
Central Pennsylvania and Gallatin, Tennessee
|
Posted 11 Feb 2016 2:17 pm
|
|
| PM/Email on its way. |
|
|
|
Bill Lowe
From:
Connecticut
|
Posted 12 Feb 2016 7:37 am great price
|
|
Cant believe this hasn't sold yet. If I had the money I would be all over this. I had 2 G2's and regret selling them. I will buy another one.
_________________
JCH D10, 71 D10 P/p fat back, Telonics TCA 500C--12-,Fender JBL Twin, Josh Swift signature. |
|
|
|
Jim Stanley
From:
Perry, Georgia, USA
|
Posted 12 Feb 2016 9:33 am Mullen G2
|
|
| Followup Email sent.... |
|
|
|
Gerry Cockrell
From:
Buffalo Gap, Texas
|
Posted 12 Feb 2016 2:41 pm
|
|
| Sorry I haven't posted today until now. Have been on the road. This guitar is SOLD pending receipt of funds. Thanks to all who have inquired about or commented on this G2. |
|
|
|
