| Author |
Topic: Goodrich L10K Wiring |
Rob Fenton
From:
Toronto, Ontario, Canada
|
Posted 2 Feb 2016 7:13 pm |
|
I recently picked up a used Goodrich L10K volume pedal.
The previous owner had removed the buffer circuit to turn it into a regular L120 sort of pedal. He did include the buffer circuit when I bought it, and I'm interested in resoldering that back into place.
Can anyone tell me what wires go where?
Anyone have a similar pedal the insides of which they might be able to send me a photo?
Thanks very much,
Rob |
|
|
 |
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 3 Feb 2016 10:44 am
|
|
Rob, your best chance is to contact Jim Palenscar about it. He and a partner own the Goodrich Company now. If anyone would know, it would be them.
_________________
Best regards,
Mike |
|
|
|
Rob Fenton
From:
Toronto, Ontario, Canada
|
Posted 3 Feb 2016 11:21 am
|
|
Thanks Mike,
I'll send Jim an email. |
|
|
|
kevin ryan
From:
San Marcos, California
|
Posted 3 Feb 2016 5:44 pm
|
|
| Is there currently wires coming off the board that you have.... in other words does the circuitboard contain the battery clip and the three other wires? It would probably be a bluish wire, a green wire, a black wire and the positive side of the battery clip. |
|
|
|
