| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Pro fex hook up.
Reply to topic
Author Topic:  Pro fex hook up.
Fred Welch

 

From:
Sheridan, MI. USA - deceased
Post  Posted 22 Jan 2016 10:25 am    
Reply with quote

How do I hook up a pro fex. Tried everything I think, no luck.. Any suggelstions?
Thanks, fred
View user's profile Send private message
Lane Gray


From:
Topeka, KS
Post  Posted 22 Jan 2016 11:18 am    
Reply with quote

I'd start dead simple, no loops, no stereo.
Guitar - volume pedal - right channel input (going from memory, thinking they're stereo) - right channel output - amp.
IS it powering on? Did it have a battery leakage issue in the past?
Check the input level and the output level.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Fred Welch

 

From:
Sheridan, MI. USA - deceased
Post  Posted 22 Jan 2016 1:17 pm     Prdfex hook up
Reply with quote

Lane,went from guitar to volume pedal to right chanel in, then right chanel out to amp, checked volume in and out, both set at 5. Getting nothing. This was a Ken Fox no battery unit.. it shows which program so I know it is turned on....
Fred
View user's profile Send private message
Curry Coster

 

From:
Glen Burnie, MD USA
Post  Posted 22 Jan 2016 4:48 pm    
Reply with quote

Have you tried the signal input jack on the front of the unit? I use the front input and then one of the outputs in the back.....

Curry
View user's profile Send private message
Fred Welch

 

From:
Sheridan, MI. USA - deceased
Post  Posted 22 Jan 2016 5:15 pm     Pro fex hook up
Reply with quote

Curry, that is the way that makes the most sense to me, maybe its toast;( ...still hope not.....
Fred
View user's profile Send private message
Rick Campbell


From:
Sneedville, TN, USA
Post  Posted 22 Jan 2016 5:33 pm    
Reply with quote

The input is the front jack. One jack..... No left and right. Try different presets to see if it works on something. There is a problem with some units that the pedal steel setting will not work if you have arrows instead of plus signs between the effects. From the back of the Profex, go into the power amp in on an amp. There is a left and right output, but it usually doesn't matter witch you use unless the program is set to favor one or the other. Sometimes delay is set up for left or right for people using two amps. If nothing else works, do a reset which returns everything to factory settings. It should work then. I've got four of them and it's the best thing I've ever used. Good luck.

RC
View user's profile Send private message Send e-mail
John Booth


From:
Columbus Ohio, USA
Post  Posted 22 Jan 2016 6:20 pm    
Reply with quote

Don't forget the vol knob on the back of the unit (as I recall) "Output Vol"
JB
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
View user's profile Send private message Send e-mail
Jerry Roller


From:
Van Buren, Arkansas USA
Post  Posted 22 Jan 2016 9:48 pm    
Reply with quote

Guitar to volume pedal, out of volume pedal into the front input of the Profex II. From the LEFT output on back of the Profex II into front of amp. Set input knob on front of Profex II at about 10:00 o'clock and the output knob on back of the Profex II to about 2:00 o'clock. It should work. The left output is for mono.
Jerry
_________________
http://www.littleoprey.org/
View user's profile Send private message Visit poster's website
Tony Prior


From:
Charlotte NC
Post  Posted 23 Jan 2016 12:38 am    
Reply with quote

to be sure, you are referring to the original PRO FEX ?




_________________
Emmons L-II , Fender Telecasters, B-Benders , Eastman Mandolin ,
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website
View user's profile Send private message Send e-mail Visit poster's website
Fred Welch

 

From:
Sheridan, MI. USA - deceased
Post  Posted 23 Jan 2016 6:49 am     Pro fex 2 I
Reply with quote

Oh good Lord I forgot to add the 2, its a profex 2 with a Ken Fox upgrade with no battery. I am so sorry, I was so used to saying profex. Sad thank you Tony for asking if I was sure it was a profex!Thanks for all you who have posted and tried to help, any chance one of the buttons next to the play could have been pushed, and has it in the middle of a chore.
Fred
View user's profile Send private message
Tony Prior


From:
Charlotte NC
Post  Posted 24 Jan 2016 1:18 am    
Reply with quote

Glad to help Fred !
_________________
Emmons L-II , Fender Telecasters, B-Benders , Eastman Mandolin ,
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron