| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Changing copedent on all-pull/ instructions on the web?
Reply to topic
Author Topic:  Changing copedent on all-pull/ instructions on the web?
Veli-Pekka Haanmäki


From:
Finland
Post  Posted 17 Nov 2015 9:15 am    
Reply with quote

I'm planning on changing copedent on my DeVis E9, three knee lever changes.
I haven't done this before so I'm looking for intructions. Anything on the web?
Thanks!
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 17 Nov 2015 9:26 am    
Reply with quote

The method of attaching rods to bellcranks varies with the make of guitar, as well as the method of attaching bellcrank to shaft.
I'd start by removing a pullrod from a bellcrank, pull it from the guitar, then put it back. Take pictures.
Then look at https://www.steelguitar.com r.com/rodding.html and the charts it links to for ideas on how to rod the new changes you want to install.
Then remove the rods on one lever at a time, loosen the bellcranks, slide them to the new location, tighten the bellcrank to the shaft, and reinstall the pullrods.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Jeff Garden


From:
Center Sandwich, New Hampshire, USA
Post  Posted 17 Nov 2015 9:34 am    
Reply with quote

Good suggestion by Lane...also on the http://steelguitar.com/ website, click on "Tweaks" at the top of the home page and then click on "Adjustments". A lot of good info on adjustment theory which you may find helpful for your new setup.
View user's profile Send private message Send e-mail
chris ivey


From:
california (deceased)
Post  Posted 17 Nov 2015 11:04 am    
Reply with quote

that's some good advice from someone who lives in the middle of a sandwich!
View user's profile Send private message
Jeff Garden


From:
Center Sandwich, New Hampshire, USA
Post  Posted 17 Nov 2015 12:24 pm    
Reply with quote

We like to think of ourselves as "the filling", Chris Smile
Another thought on the re-rodding etc...you might want to take some close-up photos at a few stages along the way just in case you need to reverse a process or post them on the Forum for assistance.
View user's profile Send private message Send e-mail
Veli-Pekka Haanmäki


From:
Finland
Post  Posted 17 Nov 2015 11:43 pm    
Reply with quote

Thanks for help! I'll try to do this!
View user's profile Send private message Send e-mail
Peter Nylund


From:
Finland
Post  Posted 18 Nov 2015 7:48 am    
Reply with quote

I'll be in your neck of the woods wednesday evening next week. If you need some assistance maybe we could work something out.
_________________
I know my playing is a bit pitchy, but at least my tone sucks
View user's profile Send private message Send e-mail Visit poster's website
Veli-Pekka Haanmäki


From:
Finland
Post  Posted 19 Nov 2015 3:56 am    
Reply with quote

Peter, tule käymään jos ehdit. 0445551668
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron