| Author |
Topic: Bigsby D10 pedal steel ?? |
Ernie Straiton
From:
Singapore
|
Posted 17 Oct 2015 5:46 am |
|
How many D10 pedal steels did Paul Bigsby build,anybody know? Ernie Straiton
Last edited by Ernie Straiton on 27 Oct 2015 3:34 am; edited 1 time in total |
|
|
 |
Alan Brookes
From:
Brummy living in Southern California
|
Posted 17 Oct 2015 9:20 am
|
|
| You might ask Ray Montee. He has an early Bigsby and knows a lot about them. |
|
|
|
Abe Levy
From:
California, USA
|
Posted 17 Oct 2015 9:26 am
|
|
I believe there is only one. A member of the forum owns it and will probably see this post eventually....
_________________
Mostly Pre-1970 guitars. |
|
|
|
Ray Montee
From:
Portland, Oregon (deceased)
|
Posted 17 Oct 2015 8:40 pm Just a suggestion.;...............
|
|
RAY MONTEE suggests one contact Clinesmith.....a SGF member that manufactures Bigsby guitars as his time.
He has records going back to the beginning of time and his words can be trusted....... |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 19 Oct 2015 4:01 pm
|
|
He made one.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
chas smith R.I.P.
From:
Encino, CA, USA
|
Posted 24 Oct 2015 12:25 pm
|
|
Not a good pic. I did some work on this guitar and I'm pretty sure that this was the D-10 that Bobbe made out of the D-8 where he shortened the necks to get the key heads to fit. It was a long time ago and if memory serves me, I installed the correct D-10 necks on the guitar, but these days, I'm just happy if I can remember to unzip in the bathroom....
 |
|
|
|
Philip Mitrakos
From:
The Beach South East Florida
|
Posted 25 Oct 2015 3:52 pm
|
|
 |
|
|
|
