| Author |
Topic: Adjusting pulls |
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 1 Mar 2004 9:42 am |
|
What do you adjust when say your B's don't
engadge together. One will start to pull before the other.
Thanks |
|
|
 |
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 1 Mar 2004 10:19 am
|
|
I think you need to put one of the pull rods in a different hole in the bellcrank.
Erv |
|
|
|
C Dixon
From:
Duluth, GA USA
|
Posted 1 Mar 2004 1:24 pm
|
|
Chuck,
Simple, but GOOD question. The answer is not so simple. It depends entirely on what make and model PSG you have. For the procedure can be quite different on different makes and models. Sadly, it is NOT possible to time the pulls exact on some.
Also, travel and ease of engagement are inversely proportional. The good part is, there is nothing IMO, that can make pedals and knee levers feel as good, as when all pulls on a given knee lever or pedal start and stop precisely at the same time.
Having said this, I agree with Erv on this.
carl |
|
|
|
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 1 Mar 2004 5:23 pm
|
|
Thanks Erv and Carl. The steel is a Zum U12.
I will try the bell cranks but is there any
other tweaking that can be done? |
|
|
|
