| Author |
Topic: Session 400 vs Twin reverb |
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 17 Sep 2015 2:16 pm |
|
I've got a flight case for a twin reverb, I'm wondering if ii could use it to ship a session 400?
Anybody know ?
The foam has all been removed, so the case likely has an extra 1.5"In all dimensions.
Thanks ! |
|
|
 |
Bill Terry
From:
Bastrop, TX
|
Posted 18 Sep 2015 5:31 am
|
|
Not 100% sure, but I had a flight case made by Keal cases in Austin that worked for both (with foam in place). I'd get Session 400 dimensions to be sure.
_________________
Lost Pines Studio
"I'm nuts about bolts" |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 18 Sep 2015 1:16 pm Dimensions
|
|
| Without having either amp here to measure, I would think that the width and height would be ok, but in general Peavey single units measure 11" in depth. My two cents. |
|
|
|
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 18 Sep 2015 3:39 pm Size matters
|
|
| Thanks guys. |
|
|
|
Bill L. Wilson
From:
Oklahoma, USA
|
Posted 18 Sep 2015 8:42 pm Amp Sizes.
|
|
| I bought a Twin Reverb in a flight case awhile back and it is the same size as my Session 400 Limited. Although I've never put the Session in the case, when they set side by side, they are the same dimensions. And I think the 400 and 400 Limited are the same size, maybe someone who owns both can tell you for sure. |
|
|
|
Tommy Mc
From:
Middlesex VT
|
Posted 19 Sep 2015 9:45 am
|
|
My Session 400 measures (aprox)
(W)26 1/4"
(H)21 1/4"(
(D)11"
Fender Twin (according to Fender)
(W)26 3/8"
(H)20 3/4"
(D)11 1/2"
Silverface Twin Reverb (according to Ampwares)
(W)20"
(H)26"
(D)10 1/2" |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 22 Sep 2015 5:30 pm
|
|
| Tommy Mc wrote: |
Silverface Twin Reverb (according to Ampwares)
(W)20"
(H)26"
(D)10 1/2" |
Don't know who made the error, but those (W) and (H) numbers are reversed.  |
|
|
|
