Need something like Radial Big Shot but NO select switch

Gary Reed · Posted 19 Sep 2015 7:02 pm

I have the Radial Big Shot.
Works great with a keyboard and a pedal steel guitar going to one one amp, but it's lacking one feature.
I need to to have the keyboard and steel guitar active at the same time. I need to get rid of the 'select' switch. Full Time 'Y'
Any suggestions?

Alan W. Black · From: New York, USA

The Radial Big Shot units I'm seeing online have a Select switch and a Both switch. I guess yours doesn't have the "both"?
Look at this Morley product - selector or splitter or mixer - with volume controls, an actual mixer.http://www.musiciansfriend.com/amplifiers-effects/morley-aby-mix-guitar-mixer-and-switcher

Gary Reed · Posted 19 Sep 2015 8:23 pm

I should have been more clear. I/m using the Big Shot I/O.
Thanks for that Morley link. I'll check it out

Dyke Corson · From: Fairmount, IL USA

I'm looking for the same thing. I called Radial and they said they had nothing that would do what I'm looking for...

Tom Gorr · From: Three Hills, Alberta

Or. .a Vegas 400 will give you two separate amp channels so you don't have impedance mismatches. I would run the steel in channel 2... all my steels sound better in that channel. .

350 bucks less value of your current amp should get you into a Vegas.

I also see on another thread that a RhythmMaster would be interesting too.

Alan W. Black · From: New York, USA

Here is an active mixer (on board buffer). Looks pretty good . There are input level controls on there somewhere.
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=1131403&gclid=CjwKEAjw1f6vBRC7tLqO_aih5WISJAAE0CYw96AKTO37Ecv0xn9wz2GnpNsYjN6ZETvljeSBs0HmnBoCZ2Hw_wcB&is=REG&Q=&A=details

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: