| Author |
Topic: Pedal Steel Guitar Tuning Nuts Fender/ Sho-Bud |
Virgil Franklin
From:
Indiana, USA
|
Posted 1 Jul 2021 8:18 am |
|
Okay it happened... I stripped a tuning nut.
I don't have a means of determining what diameter the pull rod is so..
what would be the likely replacement nut?
_________________
Virgil Franklin
Organizer: Southern Indiana Steel Guitar Show www.southernindianasteelguitar.com
Justice Pro-lite 4 x 5, Fender 400 6 x 2, Gibson Console Grande 520, Boss Katana 100 Mk2 with Basslite 2012 speaker |
|
|
 |
K Maul
From:
Hadley, NY/Hobe Sound, FL
|
Posted 1 Jul 2021 9:44 am
|
|
You mean these? I think usually with new ones you fit it to the end of the rod and it cuts its own thread into the nylon nut.
https://www.google.com/search?q=pedal+steel+nylon+tuners&client=safari&hl=en-us&prmd=sivn&sxsrf=ALeKk013fD3xHsae3OFhoANM5tUkiNGVxA:1625161164379&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiA4Z6PtcLxAhXDQc0KHRaFAOUQ_AUoAnoECAIQAg&biw=375&bih=553&dpr=2#imgrc=9FTszKxqJsmTOM&imgdii=TWhOF0kbnmDVBM
_________________
KEVIN MAUL: Airline, Beard, Clinesmith, Danelectro, Evans, Fender, GFI, Gibson, Hilton, Ibanez, Justice, K+K, Live Strings, MOYO, National, Oahu, Peterson, Quilter, Rickenbacher, Sho~Bud, Supro, TC, Ultimate, VHT, Williams, X-otic, Yamaha, ZKing. |
|
|
|
Virgil Franklin
From:
Indiana, USA
|
Posted 1 Jul 2021 10:31 am
|
|
Yeah.. they are a little difficult to find..
_________________
Virgil Franklin
Organizer: Southern Indiana Steel Guitar Show www.southernindianasteelguitar.com
Justice Pro-lite 4 x 5, Fender 400 6 x 2, Gibson Console Grande 520, Boss Katana 100 Mk2 with Basslite 2012 speaker |
|
|
|
Dave Dube
|
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 1 Jul 2021 7:25 pm
|
|
When you get some new tuning nuts, Check the end of the rod, And the first couple threads very careful.
The threads on the rod must be true to cut new threads in the nylon nut as it is threaded on.
I had a nylon nut strip out on a used steel I had, When I went to replace the tuning nut I checked the threads. It looked like the rod had been cut with a pair of pliers and mashed the threads. The bad rod had torn the threads out of the nylon nut. |
|
|
|
