| Author |
Topic: A simple tip from a steel newbie to other novices |
Peter Moller
From:
Denmark
|
Posted 3 Sep 2015 9:19 am |
|
Just want to recommend cleaning the contact between the string and the changer - I took off the strings, and cleaned with a dry sponge and re-lubricated with some sewing machine oil. Took half an hour, as I also took a look at the condition of my pickups, and cleaned there as well.
It has made a HUGE difference. Was pretty dirty. - Sustain and Treble improved 50% - it really opens up the sound. A real easy fix for a steel novice.
  |
|
|
 |
Mark van Allen
From:
Watkinsville, Ga. USA
|
Posted 3 Sep 2015 2:45 pm
|
|
Yes indeed. Makes sense that 1/2 of the contact between the string and the rest of the guitar be solid and clean. The other half would be light oil occasionally on the roller nut axle, and every so often disassembling the rollers from the axle and cleaning. (Keep 'em in order if they're gauged to the string diameter!)
When playing a gig, if I break or change a string I at least rub the top of the finger with my thumb and wipe it down.
_________________
Stop by the Steel Store at: www.markvanallen.com
www.musicfarmstudio.com |
|
|
|
Tom Gorr
From:
Three Hills, Alberta
|
Posted 3 Sep 2015 3:13 pm
|
|
| How about a full frontal pic of that axe? |
|
|
|
Jason Walker
From:
New South Wales, Australia
|
Posted 3 Sep 2015 7:38 pm
|
|
Peter, what is that guitar you have there? My curiosity has been piqued, if I may...
_________________
One Carter D-10 8+5, one Hilton VP, Peavey Bandit, so far, so good. |
|
|
|
Lane Gray
From:
Topeka, KS
|
|
|
|
Peter Moller
From:
Denmark
|
Posted 4 Sep 2015 1:51 am
|
|
Yep  |
|
|
|
Peter Moller
From:
Denmark
|
Posted 4 Sep 2015 1:53 am
|
|
| It's a Klimus Champion. All in all the same guitar as a Framus 2000. D10 8+2 setup. It's a wonderfull instrument! |
|
|
|
John Botofte
From:
Denmark
|
Posted 4 Sep 2015 3:07 am
|
|
Can I ask the Danish name of the sewing machine oil as I am Danish too? If you bought it in Denmark, that is.
John
_________________
GFI SM10-SD 3x2 Pedal Steel,
Georgeboard 8-string, 6-string DL travel lap steel, Gretsch 6-string, Gretsch Jim Dandy Parlor Guitar, Peavey Nashville 112, Boss RV-5
Zoom R8
https://soundcloud.com/lapsteelin1965 |
|
|
|
Peter Moller
From:
Denmark
|
Posted 4 Sep 2015 4:58 am
|
|
| John Botofte wrote: |
Can I ask the Danish name of the sewing machine oil as I am Danish too? If you bought it in Denmark, that is.
John |
Hej John!!
Nice to see a fellow dane in here. Are you by accident living near Copenhagen?
It's called Delta Oil. You can get it in different versions. But a nice silicon based oil would do just fine also. Stay away from wd40. |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 4 Sep 2015 6:48 am
|
|
To get oil on the strings is a no-no.  |
|
|
|
Dustin Rhodes
From:
Owasso OK
|
Posted 4 Sep 2015 7:43 am
|
|
[quote="Peter Moller"]
| John Botofte wrote: |
| Stay away from wd40. |
Indeed. Its not a lubricant. |
|
|
|
