| Author |
Topic: wtb/cabinet for a vegas 400 |
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 9 Aug 2015 7:10 am |
|
| i need a factory cabinet for a vegas 400 amp....thanks jack |
|
|
 |
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 9 Aug 2015 5:47 pm
|
|
Jack, I have a same as new Peavey Nashville 1000 cabinet that I purchased here on the Forum that I have never put to use yet. I mounted a Session 400 chassis in it and have not yet put a speaker or reverb tank in it. I am 99.99% sure it will fit a Vegas 400, only difference being it has the vent cutout on top so you would need a vent like on the Nashville 112 which cost around $10.00 from Peavey. I have since thought I might build a head cabinet for the Session 400 instead of using the combo cabinet. If you are interested please email me at rollermusic@cox.net. If someone has info that I am wrong about the Vegas 400 fitting the 1000 cabinet please let me know here.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 9 Aug 2015 6:46 pm email sent
|
|
| jerry, i sent you an email....thanks jack |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 10 Aug 2015 6:30 pm
|
|
I gave some wrong information. My cabinet is from a Session 400 Limited. It looks just like a Session 400 cabinet with a grille on top. It does not have that contoured front top edge like a 1000 or 112. It uses straps 5 1/4" center to center mounting hole and I bolted a Session 400 chassis into it without and alterations or drilling. Sorry I had you guys checking your 1000's for measurements.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Al Michalczak
From:
San Antonio, Texas, USA
|
Posted 11 Aug 2015 5:05 pm Vegas cab.
|
|
Got one. $50.00 plus shipping.
Al |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 11 Aug 2015 6:24 pm vegas cabinet
|
|
| al, i sent you a pm. thanks jerry, i appreciate it....jack |
|
|
|
Dale Boutilier
From:
Nova Scotia, Canada
|
Posted 12 Aug 2015 4:27 pm Vegas
|
|
| I have a vegas chassis in great shape anyone wanting one? |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 12 Aug 2015 5:36 pm email sent
|
|
| dale, I sent you an email....thanks jack |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 12 Aug 2015 5:37 pm email sent
|
|
| dale, I sent you an email....thanks jack |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 14 Aug 2015 9:23 am still looking for a vegas 400 cabinet....
|
|
| still looking....thanks jack |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 14 Aug 2015 2:05 pm
|
|
Jack, I went to the shop to take photos of my cabinet with the Session 400 chassis in it. I had not yet put the front grille back on it after installing the chassis. I could not get the grille to go on. It seemed that the chassis was slightly too tall, so now I have got to find out if the Session 400 chassis taller than the Session 400 Limited. It doesn't seem likely that they would be different but I could not get it to go. I will try again when I have time to see if I am missing something.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 14 Aug 2015 2:32 pm cabinet
|
|
| thanks jerry, just let me know....jack |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 26 Aug 2015 12:45 pm still looking
|
|
| i am still looking for a vegas 400 cabimet (or any cabinet that might work)....thanks jack |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 26 Aug 2015 1:14 pm
|
|
Jack, I am still in amazement that this cabinet I have fits the Session 400 and Vegas chassis perfectly but I can't get the grille to go on. It is maybe 3/16" too tall for the opening. No manipulating it in. I wish Mike Brown would come in and tell us if the Session 400 Limited had a slightly narrower face on the chassis. I would try to help you but at this point I don't know how I can.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 26 Aug 2015 2:06 pm photos of cabinet?
|
|
| jerry, could you send photos of the cabinet,? i might be able to make it work....thanks jack |
|
|
|
Gary Arnold
From:
Panhandle of Florida, USA
|
Posted 27 Aug 2015 4:39 pm
|
|
| Jack I have one, I also have someone wanting to buy it but I haven't heard back, let me know if you steel want one, it's in really good condition,,,,,,,Gary |
|
|
|
Jack Goodson
From:
new brockton,alabama (deceased)
|
Posted 27 Aug 2015 5:14 pm email sent
|
|
| gary, i sent you an email....thanks jack |
|
|
|
