| Author |
Topic: Peavey speaker wire gauge |
Tom Campbell
From:
Houston, Texas, USA
|
Posted 5 Sep 2015 6:48 am |
|
What gauge wire does Peavey use for connecting the speaker to the amp.
I am installing a Telonics 12" speaker in my NV112 and want to make some longer leads on the speaker wires.
I have some radio shack 22 gauge hookup wire, but am not sure if that is a correct match for the NV112. |
|
|
 |
Jack Stoner
From:
Kansas City, MO
|
Posted 5 Sep 2015 7:27 am
|
|
| #16 wire or "zip cord" (AC power cord) will work. The 22 ga is too small. |
|
|
|
Tom Campbell
From:
Houston, Texas, USA
|
Posted 5 Sep 2015 1:08 pm
|
|
Ended up using 18 gauge...16 gauge is heavier than what Peavey is using in the NV112. The leads I added to the Peavey leads are only 3" long. Uses spade connectors with "shrink" and left the other end bare wire for connecting to the Telonics posts.
If I ever want to use the Blue Marvel speaker again I have the original connectors still intact. |
|
|
|
