| Author |
Topic: wtb; goodrich vol. pedal model 6122 |
Kenny Holycross
From:
Ohio, USA
|
Posted 20 Aug 2015 5:32 am |
|
| this pedal is volume up & down + side to side. |
|
|
 |
Ben Elder
From:
La Crescenta, California, USA
|
Posted 23 Aug 2015 2:19 pm
|
|
-0-
_________________
"Gopher, Everett?"
Last edited by Ben Elder on 23 Aug 2015 5:48 pm; edited 1 time in total |
|
|
|
Philip Mitrakos
From:
The Beach South East Florida
|
Posted 23 Aug 2015 4:18 pm
|
|
I have the 122 ..knob on the side 2 500k pots
The 6122 has side knob but also uses a 9 volt battery ...like the goodrich matchbox circut |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 23 Aug 2015 5:05 pm
|
|
Kenny, I have never seen a Goodrich pedal with side to side tone control. Was there ever such a pedal? I have an Edwards light pedal with side to side tone control I would like to sell as I don't use it.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Craig Schwartz
From:
McHenry IL
|
Posted 25 Aug 2015 10:52 am
|
|
I have one of these and it has a large tone control knob on the side, Its a standard volume pedal with a battery model 6122, its my back up VP
Note , theres no side to side action on this pedal
_________________
SO MANY LURES, SO LITTLE TIME.... |
|
|
|
Tommy Wayne
From:
Nevada, USA
|
Posted 27 Aug 2015 7:27 pm I have one
|
|
It's not working but is in fact a stereo pedal which toggles from one input to another by side to side motion. I used to use it with an IVL system and the advantage was that I could play a steel intro and then shift to a midi string or piano patch for verse fills then back to steel for a turnaround just by moving my foot from right to left. I also used it to goose steel solo's with a synth patch but only using a small percentage of the synth combined with the steel. Tho a little cumbersome it worked very well!
Tom |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 27 Aug 2015 7:42 pm
|
|
It seems to me that you are describing an Ernie Ball Stereo Panning pedal. A very strange acting pedal.
Perhaps Goodrich made one as well but I am not aware of it.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 29 Aug 2015 11:04 am
|
|
| Goodrich did make a few of these pedals for the IVL SteelRider. I have one and maybe two of them, but I'm out of town until September 19th. If you haven't found one by then, let me know. I'm willing to let one go, if the price is right. |
|
|
|
