| Author |
Topic: New case in town!! Update!! |
Jim Heep
From:
Hendersonville, Tn
|
Posted 15 Jul 2015 8:30 am |
|
The 36 case
Interior Length: 36.50 in
Interior Width: 14.50 in
Interior Depth: 6.00 in
Case comes with foam
Can be ordered with TSA locks for $20.00
Product weight: 15.20lb (6.89kg) w/o foam
Features
In-line skate style wheels for easy transport
Trigger release latches can be retrofitted with TSA accepted key locking latches
Padlock holes include stainless steel padlock protectorclips
Cushion grip handles on three sides
Waterproof and dust tight design (MIL-C-4150J)
Molded-in hinge for added protection
Trigger release latch system
Snap-down rubber over-molded cushion grip handle
Ambient pressure equalization valve (MIL-STD-648C)
Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
Resistant to impact damage (MIL-STD-810F)
Lifetime Warranty
Price 249.00
Plus tax (Tn residents only) and shipping
Order from:
jkloudnproud@gmail.com
www.steelguitarsnashville.com
Last edited by Jim Heep on 20 Aug 2015 5:53 am; edited 2 times in total |
|
|
 |
Russ Wever
From:
Kansas City
|
Posted 15 Jul 2015 9:57 pm
|
|
Where do the legs, rods & pedal rack go?
How is it blocked to secure the cabinet?
_________________
www.russface
www.russguru |
|
|
|
Jim Heep
From:
Hendersonville, Tn
|
Posted 16 Jul 2015 12:56 am
|
|
Where we normally put them. I've foamed mine in, nothing moves. You get three, pieces of foam that's two inch and one piece that a 1/4 inch. I put the waffle on the bottom face down, except for pedal bar and use the 1/4 inch and that could be doubled (depending on pedal length). Cut out three sides around the cabinet. And then use one two inch for the lid. You could also use a piece of the 1/4 to put in between the pedals and cabinet. Works great!!
 |
|
|
|
Carl Heatley
From:
Morehead City,NC
|
Posted 16 Jul 2015 2:54 am
|
|
| Do they come in different sizes?...I,ll need a case case for my S10 when I finish building it. |
|
|
|
Jim Heep
From:
Hendersonville, Tn
|
Posted 16 Jul 2015 8:32 am
|
|
| Well for the s-10 you would have a lot of room for legs and pedal bar. And you could cut out foam for each piece. I've got a case that will work and I have used one but it's made out of a lighter ABS. But it's not dust and water proof. The case shown is a lot sturdier and better hands down. But, the cost for the other is cheaper but it comes with no foam. For 25.00 more you get the case shown. |
|
|
|
Jim Heep
From:
Hendersonville, Tn
|
Posted 20 Aug 2015 5:53 am
|
|
The 42 case
For the steels that need more room like the older MSA's, D-12's or one with Grover tuners this one is available!
Interior Length: 42.50 in (107.95 cm)
Interior Width: 17.00 in (43.18 cm)
Interior Depth: 7.52 in (19.10 cm)
Product Weight 24.50lbs
290.00 plus tax (Tn residents only) and shipping |
|
|
|
