| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Hilton Volume Pedal Power Cable Repair
Reply to topic
Author Topic:  Hilton Volume Pedal Power Cable Repair
Charlie Thompson

 

From:
South Carolina, USA
Post  Posted 17 Jul 2015 4:22 pm    
Reply with quote

The vinyl Jacket has come apart..It still works, but needs to be fixed. Anyone done this repair? Is this a do it myself or a send back to Keith
View user's profile Send private message Send e-mail Visit poster's website
Keith Hilton

 

From:
248 Laurel Road Ozark, Missouri 65721
Post  Posted 17 Jul 2015 6:27 pm    
Reply with quote

This is a repair you can do. Take the hinge bolts out and separate the top and bottom halfs of the pedal. Push the wires inside, where the exposed inter wires are inside the pedal. Only 3 wires power the pedal: green is +12,white is -12,black is ground.
The red wire has 5 volts on it and it is not used The red wire must be isolated meaning taped off. Inside the cable there is a foil wrap and a bare braded wire. The foil wrap is there for shielding. The bare braded wire is there for strengh. The foil wrap and braded wire 'must not touch anything' or there will be hum noise. Just use black electrical tape to tape off everything. Hope this information helps. I do repair pedals if you feel you can't accomplish the repair.
View user's profile Send private message Send e-mail Visit poster's website
Billy Henderson

 

From:
Portland, AR, USA
Post  Posted 18 Jul 2015 3:38 pm     Keith Hilton
Reply with quote

Keith I sent five emails to you about fixing a Hilton pedal, never got an answer. What did I do wrong?
View user's profile Send private message Send e-mail Visit poster's website
Charlie Thompson

 

From:
South Carolina, USA
Post  Posted 20 Jul 2015 6:26 am    
Reply with quote

Keith thanks for the reply..Just before I read this I realized I could push the jacket back inside the pedal some and when tightened the it stays in place.
View user's profile Send private message Send e-mail Visit poster's website
Keith Hilton

 

From:
248 Laurel Road Ozark, Missouri 65721
Post  Posted 20 Jul 2015 8:13 am    
Reply with quote

Billy, I got all your e-mails and answered each one. With the last e-mail you sent, I realized you were not getting my e-mails. Everyone else has been getting my e-mails. Something is wrong with your e-mail in box.
View user's profile Send private message Send e-mail Visit poster's website
Billy Henderson

 

From:
Portland, AR, USA
Post  Posted 22 Jul 2015 7:24 am     Kieth Hilton
Reply with quote

Kieth the information you sent about the Hilton Pedal cleaned up the pedal and now the pedal works perfect. Sorry I had the pedal screwed up. I appreciate your help. Thanks
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron