| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Emergency Tone Bar?
Goto page 1, 2  Next
Reply to topic
Author Topic:  Emergency Tone Bar?
Mike Heugel


From:
Taylor, Michigan, USA
Post  Posted 8 Jul 2015 2:04 pm    
Reply with quote

For the first time in about a year and a half, I find myself sitting behind a pedal steel that I can call my own. Only problem is, it'll be at least another 3 weeks before that next paycheck comes in and I get my hands on a fine bar.

Anyone have any suggestions on an easy, cheap, readily-available emergency substitute for a standard bar? I thought about digging through my old sockets and beer bottles, but I figured I'd poll the experts first.

Thanks in advance,

Mike
_________________
"No officer, I don't even own a cat... "
View user's profile Send private message Send e-mail
John De Maille


From:
On a Mountain in Upstate Halcottsville, N.Y.
Post  Posted 8 Jul 2015 2:14 pm    
Reply with quote

A socket wrench, just the socket, will do nicely. Something bigger than a 13/16's should do it. But it must be a deep socket, like a spark plug socket. Even a short length of brass or uncoated steel pipe. Of course, this is just temporary.
View user's profile Send private message Send e-mail
Larry Dering


From:
Missouri, USA
Post  Posted 8 Jul 2015 4:03 pm    
Reply with quote

Mike, I misplaced my bar and had to play a lake party with a craftsman deepwell chrome socket. I used a 7/8. It is not heavy enough for full time use, but worked for my bailout bar.
View user's profile Send private message Send e-mail
James Sission

 

From:
Sugar Land,Texas USA
Post  Posted 8 Jul 2015 5:24 pm    
Reply with quote

PM me your mailing address and I will send you a tone bar tomorrow...James

Last edited by James Sission on 8 Jul 2015 6:56 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Tom Quinn


Post  Posted 8 Jul 2015 5:59 pm    
Reply with quote

I played a gig with a beer bottle once after I left my bar and picks at home. Flat pick and a Bud tall...
_________________
I need an Emmons!
View user's profile Send private message Send e-mail
Jim Smith


From:
Midlothian, TX, USA
Post  Posted 8 Jul 2015 9:25 pm    
Reply with quote

Tom Quinn wrote:
I played a gig with a beer bottle once after I left my bar and picks at home. Flat pick and a Bud tall...

I've done that to show off a few times and it didn't sound half bad! Mine was Miller Lite though! Laughing
View user's profile Send private message Send e-mail
Mike Perlowin


From:
Los Angeles CA
Post  Posted 8 Jul 2015 9:36 pm    
Reply with quote

http://bb.steelguitarforum.com/viewtopic.php?t=282399
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
View user's profile Send private message Send e-mail Visit poster's website
Charlie McDonald


From:
out of the blue
Post  Posted 9 Jul 2015 1:52 am    
Reply with quote

Lowell George used a socket, famously published in a German magazine as 'der socket.' It's what got me playing lapsteel, decades ago.
I used it for years; it works as well as a bar, for a beginner; I've still got it on the shelf in front of me--a reminder, I suppose.
Beats a beer can.
View user's profile Send private message Send e-mail
John Booth


From:
Columbus Ohio, USA
Post  Posted 9 Jul 2015 3:12 am    
Reply with quote

Mike,
I'll send you a bar if you haven't got one yet.
PM me an address if you still need it.
John in Ohio
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
View user's profile Send private message Send e-mail
Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 9 Jul 2015 4:19 am    
Reply with quote

That's very nice of you John to offer to send a bar. Also, Jow Wright wrote in one of his publishing so that he played a gig with a spark plug wrench.
View user's profile Send private message Send e-mail
John Booth


From:
Columbus Ohio, USA
Post  Posted 9 Jul 2015 4:44 am    
Reply with quote

I don't doubt it.
A guy like Joe CAN play with a spark plug wrench Very Happy
_________________
Jb in Ohio
..................................
GFI S10 Ultra, Telecaster, a Hound Dog, and an Annoyed Wife
..................................
View user's profile Send private message Send e-mail
James Sission

 

From:
Sugar Land,Texas USA
Post  Posted 9 Jul 2015 6:24 am    
Reply with quote

Mike, check your PM for tracking number. The bar is on its way. Best of luck to you, enjoy your adventure....J
View user's profile Send private message Send e-mail
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 9 Jul 2015 9:50 am    
Reply with quote

One time I forgot my little suitcase in the driveway and had to play a four-hour Legion gig with a Bic lighter and no picks. Sounded kind of like a pedal banjo, but nobody seemed to notice but me.
View user's profile Send private message Send e-mail
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 9 Jul 2015 1:45 pm    
Reply with quote

Some of the things I've tried or used:

Spark-plug socket
Shot glass
Wrist pin (piston pin)
Flashlight battery
Bic Lighter
Flashlight
Pocket-knife
Glass pill bottle
Sharpie pen
Broomstick end
Screwdriver handle

Cool
View user's profile Send private message Send e-mail
Mike Heugel


From:
Taylor, Michigan, USA
Post  Posted 9 Jul 2015 2:08 pm    
Reply with quote

Thanks for the suggestions gang. James Sission was good enough to ship me a loaner until the end of the month.

On another note, I also scored a like-new Stevens bar, APM made, at the pawn shop today for $2. If nothing else, I can practice my Jerry Douglas licks for a couple days.
_________________
"No officer, I don't even own a cat... "
View user's profile Send private message Send e-mail
Mike Heugel


From:
Taylor, Michigan, USA
Post  Posted 9 Jul 2015 2:20 pm    
Reply with quote

Looks like Ol' Jeff had what I'd refer to as a multi-tool in his bag...




_________________
"No officer, I don't even own a cat... "
View user's profile Send private message Send e-mail
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 9 Jul 2015 2:52 pm    
Reply with quote

When I was 16 I built my first lap steel and I used the first thing I had to hand, which was a chunk of rectangular bar stock. I cringe now when I think of how anyone could have been so naive. Embarassed Laughing
View user's profile Send private message Send e-mail
James Sission

 

From:
Sugar Land,Texas USA
Post  Posted 9 Jul 2015 2:58 pm    
Reply with quote

Mike, how long have you been playing ?
View user's profile Send private message Send e-mail
Quentin Hickey

 

From:
Nova Scotia, Canada
Post  Posted 9 Jul 2015 5:49 pm    
Reply with quote

Side note.

Every time I hear ZZ tops sharp dressed man, I think of Jeff Newman😉
View user's profile Send private message Send e-mail
Mike Heugel


From:
Taylor, Michigan, USA
Post  Posted 9 Jul 2015 8:43 pm    
Reply with quote

James Sission wrote:
Mike, how long have you been playing ?


Only a couple years, so I am still woefully amateur.
_________________
"No officer, I don't even own a cat... "
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 10 Jul 2015 3:33 am    
Reply with quote

Mike, a lot of the Sacred Steel players use the Stevens type bars. In the 80s and 90s, it was hard to find a good Stevens bar, as the pre-plating polishing was iffy. Don't know if this is still the case.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Quentin Hickey

 

From:
Nova Scotia, Canada
Post  Posted 10 Jul 2015 5:07 am    
Reply with quote

Dunlop bars will do as well. You can often find a used one fairly cheap at a used store or the online classifieds.
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 10 Jul 2015 6:27 am    
Reply with quote

As for the OP, if you have mechanic friends, wrist pins work a treat. Hard, smooth, heavy.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Ian Rae


From:
Redditch, England
Post  Posted 10 Jul 2015 11:22 am    
Reply with quote

For the benefit of UK readers, that's a gudgeon pin.

Excellent thought.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website
Charlie McDonald


From:
out of the blue
Post  Posted 10 Jul 2015 11:51 am    
Reply with quote

Sometimes I wish I still had my one inch by four inch one pound twelve string bar.
It was advertised as a twelve pound bar; caught my eye. Wink
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron