| Author |
Topic: Baffel 15" for Fender Twin |
Gordon Borland
From:
San Antonio, Texas, USA
|
Posted 28 Jun 2015 6:04 am |
|
| Baffel for 15" speaker for Fender Twin. Thanks. |
|
|
 |
Jack Stoner
From:
Kansas City, MO
|
Posted 28 Jun 2015 7:32 am
|
|
Some issues with Twin speaker baffles. Older ones were screwed in. Later ones are glued in and much harder to change since you have to cut the old one out, mount brackets to the cabinet so you can screw the new baffle in.
I had a Twin, AB768 Chassis with screw in baffle, but the speaker must be located to one side so it does not interfere with the transformers.
You need to post what Twin you have so someone that has or makes them are aware of your specific requirement. |
|
|
|
Gordon Borland
From:
San Antonio, Texas, USA
|
Posted 28 Jun 2015 12:03 pm Thanks.
|
|
| It is a 1974 Silver face one owner. I see no screws on the baffle. I will leave it the way it is. I will just put the 15" out of a Steel King in a cab and leave it at that and just use it in the music studio and continue to take the Nashville 400 to gigs. Thanks Jack. |
|
|
|
Tommy Wayne
From:
Nevada, USA
|
Posted 29 Jun 2015 9:44 pm Twin cab with 15" baffle
|
|
I have one I'd sell cheap if interested!
TW |
|
|
|
Gordon Borland
From:
San Antonio, Texas, USA
|
Posted 30 Jun 2015 6:07 am Thanks Tommy.
|
|
| I am going to leave well enough alone. Thanks for the offer Tommy. |
|
|
|
Tommy Wayne
From:
Nevada, USA
|
Posted 30 Jun 2015 6:14 am hey
|
|
| You Betcha! |
|
|
|
