Need Help With Peavey Nashville 112 Reverb Pinout

Joey Ace · From: Hamilton, Ontario, Canada

I'm installing a 3 Spring Reverb Tank in my old NV112.
The new tank has a different connector, so I'm cutting the connector off and soldering directly to the board.

The original tank is long gone, so I can't compare.

The new tank is standard two wire:
- Send & Shield
- Return & Shield

What goes to what on the four pins in the preamp picture?

Thanks in advance

Ken Fox · From: Nashville GA USA

Joey Ace · From: Hamilton, Ontario, Canada

Thank You Ken !

That's exactly the info I need.

Joey

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: