| Author |
Topic: ABY question |
Clark Doughty
From:
KANSAS
|
Posted 1 Jun 2015 7:38 pm |
|
| I have a BigShot ABY pedal with one input, A & B output and tuner. I need something where I can switch both my PSG's to use one amp. Is there a way I can use this switch to do that? Seems like I've read something a while back on how to do this but can't remember......thanks for your help........clark |
|
|
 |
Jonathan Lam
From:
Brooklyn, NY
|
|
|
|
James Holland
From:
Alabama, USA
|
Posted 2 Jun 2015 2:50 am
|
|
| I believe an ABY pedal should work both ways: Two inputs switching to the same output, or one input switching to two outputs. Try it in reverse and see. My Fender ABY works both ways. |
|
|
|
Tom Gorr
From:
Three Hills, Alberta
|
Posted 2 Jun 2015 3:01 am
|
|
| If that's the same Bigshot ABY as I have... there seems to be a lot of tone suck on the B channel...probably due to the isolation transformer. |
|
|
|
Ollin Landers
From:
Willow Springs, NC
|
Posted 2 Jun 2015 5:36 am
|
|
I have a Radial Big Shot. I use it on my pedal board to switch from PSG to Tele. Just reverse it. Most AB/Y pedals work when reversed.
I bought the Big Shot instead of the i/o http://www.tonebone.com/re-bigshot-io.htm
I think the AB/Y is more versatile.
_________________
Zum SD-12 Black, Zum SD-12 Burly Elm Several B-Bender Tele's and a lot of other gear I can't play.
I spent half my money on gambling, alcohol and wild women. The other half I wasted. W.C. Fields |
|
|
|
Clark Doughty
From:
KANSAS
|
Posted 2 Jun 2015 4:15 pm aby pedal
|
|
| Works both ways......thanks for your help........clark |
|
|
|
