| Author |
Topic: PSG Parts- New BIG Wrench Styles! Check these out... |
Michael Yahl
From:
Troy, Texas!
|
Posted 26 May 2015 8:00 pm |
|
As many of you know, I've been out of BIG wrenches for some time now. Actually the material had been cut and sitting on my bench for almost a year. Well, now I have a CNC lathe and can do the massive material removal that these require in addition to some fancy stuff.
I've had these floating around in my head for some time but just didn't have the equipment to execute the designs. Well now I do!
So with a bit of input from my wife on one of these, I'm raising the bar.
These new wrenches are more than half the weight of the originals.
Original: 1.8ozs
New style: 0.8ozs
This rounds out the line to 32 Wrench configurations that I now produce.
These are all available in both 3/16" Hex or 5mm Hex Sockets. (Tri-Lobe is only available in 3/16" at this time)
Hope y'all like them...
The "Wheely"
The "5 Spoke"
The "Racer"
The "Tri-Lobe"
This one is my wife Agne's idea as she sees many elderly patients with arthritis. She believes that this type of design should be easier to rotate for those with onset arthritis. (I just made what she told me to.)
And of course the "Original"
It'll be a few months before I run these again. Just FYI.
Get 'em here http://psgparts.com/Tuning-Wrenches_c27.htm
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
 |
Tom Wolverton
From:
Carpinteria, CA
|
Posted 26 May 2015 8:40 pm
|
|
I like Agne's design. Won't roll very far when you drop it on a dark stage. : )
_________________
To write with a broken pencil is pointless. |
|
|
|
Rick Rian
From:
Rochester, Minnesota, USA
|
Posted 27 May 2015 8:01 am PSG Parts
|
|
Sweet designs! Are you making these anymore?
Still looking for something to use on my old Pro II ... 
Just checking ... |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
|
|
|
Rick Rian
From:
Rochester, Minnesota, USA
|
Posted 27 May 2015 9:10 am
|
|
Hot dog ! Thanks ...  |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 31 May 2015 2:27 am
|
|
Michael awesome!
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
chris ivey
From:
california (deceased)
|
Posted 7 Jun 2015 12:52 pm
|
|
| bitchin' set of wheels, man! |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 7 Jun 2015 4:46 pm
|
|
Thanks guys. Now I just need buyers!
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
Ken Byng
From:
Southampton, England
|
Posted 24 Jun 2015 12:29 pm
|
|
2 Racer tuning wrenches just ordered Michael.
They look just so cool.
Ken
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E, |
|
|
|
Chuck McGill
From:
An hour from Memphis and 2 from Nashville, R.I.P.
|
Posted 27 Jun 2015 6:39 am
|
|
Extremely clean and precise is Michael's business card.
Never seen better. |
|
|
|
Alan Waslin
From:
Hull, England
|
Posted 27 Jun 2015 7:35 am Zb
|
|
DO you make them for ZBs with allen key end
_________________
building a pedal steel out of part from
C6 part Will be putting photo on forum later |
|
|
|
Eric Dahlhoff
From:
Point Arena, California
|
|
|
|
Ken Byng
From:
Southampton, England
|
Posted 4 Jul 2015 3:23 am
|
|
Michael - my 'racer' wrenches arrived today. They are superbly engineered, beautiful to look at and wonderful to use. Thanks my friend, you are a genius at what you do.
Ken
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E, |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 9 Jul 2015 1:43 pm
|
|
Thanks Guys. I appreciate all of your comments.
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
Tony Glassman
From:
The Great Northwest
|
Posted 9 Jul 2015 2:24 pm
|
|
| Do you make a wrench that will work for push/pull guitars (7/64)? |
|
|
|
Jimmie Miller
From:
Dothan, Alabama
|
Posted 9 Jul 2015 5:29 pm tuning Wrench's
|
|
Yes Tony,
I ordered one, got it today. Works great.
_________________
Sierra 14 string E69, Nashville 400, Nashville 112, MB-200/ MB 500 Tommy Huff 1-15 Cab. |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
|
|
|
Billy Knowles
From:
Kenansville, N. C. 28349 usa
|
Posted 9 Jul 2015 5:56 pm Psg
|
|
Michael makes great products, just put on 2 Sho Bud knee lever kits from Michael and they are great.
_________________
Billy Knowles
STEEL GUITAR EAST
Emmons authorized dealer and approved service technician
my web site: http://www.steelguitareast.com |
|
|
|
John Brabant
From:
Calais, VT, USA
|
Posted 10 Jul 2015 1:57 pm
|
|
My question was already answered.
_________________
John Brabant
1978 Emmons D-10 P-P |
|
|
|
Stu Schulman
From:
Ulster Park New Yawk (deceased)
|
Posted 14 Oct 2015 12:12 pm
|
|
Michael,I hope you will have these at the Feenix show?
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 14 Oct 2015 12:57 pm
|
|
You betcha Stu! We'll be there with all of our little bits and pieces.
Just finished making our reservations.
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
