| Author |
Topic: Mod Reverb for NV400 |
Ronald Sikes
From:
Corsicana, Tx
|
Posted 27 Apr 2015 3:24 am |
|
I installed this reverb in my NV112 and it sounds fantastic. Will this work in a NV400 ?
Thx , Ron
https://www.amplifiedparts.com/products/P-RMOD-9EB2C1B
_________________
Show Pro #26 & #83,BJS bars,Stereo Steel,Tommy Huff cabs loaded with JBL D130's, Wampler pedals,NV112,NV400, Steelers Choice Seats |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 27 Apr 2015 3:46 am
|
|
YES. And sound better
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 27 Apr 2015 12:54 pm
|
|
How would I know which Mod tank to buy for my NV400?
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Ronald Sikes
From:
Corsicana, Tx
|
Posted 27 Apr 2015 1:26 pm
|
|
Thanks Lane.
Richard , If you click on the link it will let you order one. This is the same one Tommy White told us about. It makes a huge difference in your sound. Well worth the $20.00
https://www.amplifiedparts.com/products/P-RMOD-9EB2C1B
_________________
Show Pro #26 & #83,BJS bars,Stereo Steel,Tommy Huff cabs loaded with JBL D130's, Wampler pedals,NV112,NV400, Steelers Choice Seats |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 28 Apr 2015 4:00 pm
|
|
| The 9eb2c1b will work in virtually any Peavey amp. It is a three spring tank. The older steel amps such as Session 400 used a two spring tank, 4eb2c1b. The three spring tank will replace these as well |
|
|
|
Justin Griffith
From:
Taylor, Texas, USA
|
Posted 29 Apr 2015 3:45 am
|
|
| Richard Sinkler wrote: |
| How would I know which Mod tank to buy for my NV400? |
As far as I know, the MOD tanks use the same numbering system as the Accutronics.
I lost a reverb can in my LTD and opted for the three spring Mod. Best thing I have ever done. I think the Mod tanks are more what the Accutronics/Hammond used to be.
_________________
Emmons/Sho~Bud/Blanton, Fender/Peavey.
Telonics pedal |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 29 Apr 2015 10:55 am
|
|
I think my tank is good. My issue is a high pitch squeal. I have another thread about that. Ken mentioned I should go back to the original opamp in the reverb circuit. The opamp should be delivered in the next few days. If that doesn't stop the squeal, I will try a new tank. I already replaced the cable between the tank and chassis.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Jack Hanson
From:
San Luis Valley, USA
|
Posted 29 Apr 2015 12:58 pm
|
|
I have a Peavey LTD 400 that I purchased new about 1977. After the factory JBL blew up, it sat in a closet for decades until I purchased a used BW 1501-4 from a fellow Forumite a couple years ago.
Now it sounds wonderful, with the exception of the reverb. The 'verb works, but there's a constant hiss that increases proportionately as the reverb pot is turned up.
Would replacing the original tank with one of the Mod units solve that problem, or are the noise issues unrelated to the tank itself? |
|
|
|
Ron Scott
From:
Michigan
|
Posted 29 Apr 2015 6:30 pm
|
|
P-RMod-9EB2C1B on the web site https://www.amplifiedparts.com This one fits the Nashville 400. Call and ask for Sam. 1-480-296-0890 . Ron
_________________
Franklin D10 Stereo - 8 and 6 - Black Box-Zum Encore 4 and 5 Nashville 400,Session 400, DD3 for delay ,also Benado Effects pedal.
Steeling with Franklin's..and Zum Encore |
|
|
|
Jason King
From:
Missouri, USA
|
Posted 8 May 2015 7:25 am
|
|
| What setting do most of you run on reverb after doing this mod? |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 8 May 2015 10:17 am
|
|
I have a NV400, and run my reverb between 3 & 4. I don't like heavy saturation of reverb in my sound. It is the same as before the mod. I also hate delay.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Justin Griffith
From:
Taylor, Texas, USA
|
Posted 9 May 2015 5:32 pm
|
|
| Jason King wrote: |
| What setting do most of you run on reverb after doing this mod? |
On my LTD i now run it about 3-4 instead of 6-7. Keep in mind I went from a two spring can to a three spring.
I am about tho do the same swap to my Session 400. Those MOD three spring tanks sound killer in those old amps!
_________________
Emmons/Sho~Bud/Blanton, Fender/Peavey.
Telonics pedal |
|
|
|
Ronald Sikes
From:
Corsicana, Tx
|
Posted 9 May 2015 6:11 pm
|
|
I run my reverb on 3 to 4 with a Wampler delay. I like delay. 
_________________
Show Pro #26 & #83,BJS bars,Stereo Steel,Tommy Huff cabs loaded with JBL D130's, Wampler pedals,NV112,NV400, Steelers Choice Seats |
|
|
|
