| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic PLEASE excuse my ignorence - Amp for HUMBUCKERS?
Reply to topic
Author Topic:  PLEASE excuse my ignorence - Amp for HUMBUCKERS?
Dennis Brooker


From:
Iowa, USA
Post  Posted 5 May 2015 7:10 pm    
Reply with quote

PLEASE excuse my ignorance!! I have got 2 guitars with humbuckers and I want the maximum in warm, soft tone - Do NOT want or need any of the other stuff that's on the amp I have now for distortion - Can anyone advise a small, 10-15 watt amp that has SIMPLE controls in the $2-300.00 price range or let me know if there just isn't one. Yeah, I know, but that's my budget - Thanks from an old man Smile Dennis Brooker
View user's profile Send private message Send e-mail
Michael Maddex


From:
Northern New Mexico, USA
Post  Posted 5 May 2015 7:43 pm    
Reply with quote

Dennis, you don't mention what amp you currently have. Perhaps there is a way to get the sound that you are looking for out of it. That is, just don't use all the fancy stuff. If not, I would be inclined to check out the low-power solid-state amps from Fender. Here are a some to consider:

http://www.musiciansfriend.com/amplifiers-effects/fender-frontman-10g-10w-guitar-combo-amp
http://www.musiciansfriend.com/amplifiers-effects/fender-champion-20-guitar-combo-amp
http://www.musiciansfriend.com/amplifiers-effects/fender-mustang-i-v.2-20w-1x8-guitar-combo-amp

Of course, you should purchase from the vendor of your choice.

I have an older model (before digital effects) FM 210 60 Watt that has been a very reliable amp. I can get a nice, clear sound out of it and never bother with the over-drive distortion stuff myself.

HTH. Good luck with your search.
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke
View user's profile Send private message Send e-mail Visit poster's website
Dennis Brooker


From:
Iowa, USA
Post  Posted 5 May 2015 8:32 pm    
Reply with quote

Michael - Thanks much!! I have a used, DANVILLE TEC20R with LOTS of knobs and settings I got as part of a trade deal - I think I'll consider the Fenders you've listed and see if anyone else offer suggestions - I just like to keep things as simple as possible - Dennis Brooker
View user's profile Send private message Send e-mail
Richard Wilhelm

 

From:
Ventura County, California
Post  Posted 5 May 2015 11:57 pm    
Reply with quote

I also, like Michael get a nice clean sound from a Fender solid state, FM212 for my old Fender steel. Through the amps he suggested all have 8" speakers, which I'm sure won't give you the warm sound you want. I would try the Fender Mustang II (40 w 12" speaker). That sould give you give you wamth in a compact package for $200. It does have all the bells and whistles, but the main question is whether you can hear any digital repeats you might not want. Another route for simple. is looking for an old Crate or Randell solid state. It could be the problem with the amp you have is that the speaker is maybe a single 10" or less. Another thing to consider is an upgrade to the reverb in whatever amp you get. For $100 an EHX Holy Grail is the cheapest good upgrade IMO. I can't give you any specific advise regarding humbuckers. Arrow
_________________
"Be Kind to Animals, don't eat Them"
"If you know music, you°ll know most everything you°ll need to know" Edgar Cayce
"You're only young forever" Harpo Marx

Fender 400, Fender FM212, G&L ASAT.

Was part of a hippie-Christian store in Cotati, California (circa 1976) called THE EYE OF THE RAINBOW. May God love you.
View user's profile Send private message Send e-mail
Dennis Brooker


From:
Iowa, USA
Post  Posted 6 May 2015 4:13 am    
Reply with quote

SORRY - AGAIN Sad I should have mentioned I want this for a regular electric and not a steel guitar - Thanks again - Dennis Brooker
View user's profile Send private message Send e-mail
Michael Maddex


From:
Northern New Mexico, USA
Post  Posted 6 May 2015 7:28 am    
Reply with quote

Dennis Brooker wrote:
SORRY - AGAIN Sad I should have mentioned I want this for a regular electric and not a steel guitar - Thanks again - Dennis Brooker


And I might also have mentioned that I use the Fender FM 210 for a variety of steel and standard guitars. Cool
_________________
"For every expert, there is an equal and opposite expert." -- Arthur C. Clarke
View user's profile Send private message Send e-mail Visit poster's website
Richard Wilhelm

 

From:
Ventura County, California
Post  Posted 6 May 2015 7:37 am     j
Reply with quote

My remarks are still aplicable for standard guitar. To get the warm, soft sound you want, I believe a 12" speaker is needed. As far as the the Fender Mustangs II is concerned, you can do a search on this forum and you'll find some good words. The speaker is a Fender special design which is an Emminance Legend, (also called the 'gold label') an excellent speaker. It comes with more bells and whistle and watts than you want including a computer interface, but you can use what you want. It is compact and those bells and whistle can probably help you dial in the sound you desire. I'm not sure you can do better, especially at that price.

I've had a reissue Twin Reverb, Musicmans, Randall (all tubes) and my Fender solid state gives me a crisp and clean sound that sounds best for my Fender steel. For guitar my Randall is more challenging with more of a slightly distorted bite, but to get a warm softer tone, the Fender solid state wins. Evil Twisted
_________________
"Be Kind to Animals, don't eat Them"
"If you know music, you°ll know most everything you°ll need to know" Edgar Cayce
"You're only young forever" Harpo Marx

Fender 400, Fender FM212, G&L ASAT.

Was part of a hippie-Christian store in Cotati, California (circa 1976) called THE EYE OF THE RAINBOW. May God love you.


Last edited by Richard Wilhelm on 6 May 2015 8:05 am; edited 9 times in total
View user's profile Send private message Send e-mail
Dennis Brooker


From:
Iowa, USA
Post  Posted 6 May 2015 8:04 am    
Reply with quote

Thanks MUCH to all - Considering the Fender Mustang II - Dennis Brooker
View user's profile Send private message Send e-mail
Jim Cohen


From:
Philadelphia, PA
Post  Posted 6 May 2015 8:13 am    
Reply with quote

I'm very happy with my Roland Cube 80XL for standard guitar. It has a number of effects built in but I mostly only use the reverb and it give a very nice, clean sound.
_________________
www.JimCohen.com
www.RonstadtRevue.com
www.BeatsWalkin.com
View user's profile Send private message Send e-mail Visit poster's website
Dennis Brooker


From:
Iowa, USA
Post  Posted 6 May 2015 8:41 am    
Reply with quote

Jim Cohen wrote:
I'm very happy with my Roland Cube 80XL for standard guitar. It has a number of effects built in but I mostly only use the reverb and it give a very nice, clean sound.


Thanks Jim - I'll check it out as well - Best - DB
View user's profile Send private message Send e-mail
Jim Cohen


From:
Philadelphia, PA
Post  Posted 6 May 2015 8:46 am    
Reply with quote

Lightweight and around $300.
_________________
www.JimCohen.com
www.RonstadtRevue.com
www.BeatsWalkin.com
View user's profile Send private message Send e-mail Visit poster's website
Dave Grafe


From:
Hudson River Valley NY
Post  Posted 6 May 2015 9:24 am    
Reply with quote

Keep your current amp and put a Steel Guitar Black Box between the pickup and the VP. Next best option is a pot VP and a tube amp, but the SGBB is the one that works.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron