| Author |
Topic: New 10 string Pedal steel Wide String Spacing. |
Jimmie Hudson
From:
North Carolina, USA
|
Posted 21 Mar 2015 2:21 pm |
|
I am looking to get feedback here on the forum on a new 10 string Pedal Steel Guitar with a 3/8 inch string spacing like some 6 and 8 string lap steels and some dobros have.
Would you share you opinion on whether you would like the wide 3/8 string spacing or would prefer the standard narrow spacing that is on most new 10 string pedal steels.
Thanks for your time and opinions.
I am thinking of coming out with a wide 3/8 string spacing Pedal steel is the reason for this poll. |
|
|
 |
Larry Phleger
From:
DuBois, PA
|
Posted 21 Mar 2015 3:32 pm
|
|
| I have always preferred the 3/8" spacing. I have never seen it used on a name brand steel, so I have learned to deal with the closer spacing that is standard on today's PSGs. If a pedal steel was built with a 3/8" spacing, the standard 10 string tone bars would be a little too short. I have built several non-pedal 10 steels using the 3/8" spacing and found the 12 string tone bar to be more appropriate for use with them. |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 21 Mar 2015 3:51 pm tone bar
|
|
| Larry Phleger wrote: |
| I have always preferred the 3/8" spacing. I have never seen it used on a name brand steel, so I have learned to deal with the closer spacing that is standard on today's PSGs. If a pedal steel was built with a 3/8" spacing, the standard 10 string tone bars would be a little too short. I have built several non-pedal 10 steels using the 3/8" spacing and found the 12 string tone bar to be more appropriate for use with them. |
The 12 string tone bar is very good for the 3/8 string spacing guitar. That is what I use with my guitar.
I also use a 12 string pickup to be sure to reach all the strings well. |
|
|
|
Dave Zirbel
From:
Sebastopol, CA USA
|
Posted 21 Mar 2015 4:00 pm
|
|
Those old Fender 10 stringers (models 800 and 2000) had 3/8" spacing. They feel great! 
_________________
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps
Last edited by Dave Zirbel on 21 Mar 2015 6:12 pm; edited 1 time in total |
|
|
|
Roger Shackelton
From:
MINNESOTA (deceased)
|
Posted 21 Mar 2015 4:26 pm
|
|
I believe Buddy Emmons stated once in an interview that he would have liked to play a D-10 string PSG with 3/8 string spacing.??
Roger |
|
|
|
Richard Wilhelm
From:
Ventura County, California
|
Posted 21 Mar 2015 4:55 pm
|
|
If I was planning on buying another steel, that is what I would get. I don`t understand why it`s not done. I find the 3/8" to be just right on my Fender, and I have narrow fingers.
_________________
"Be Kind to Animals, don't eat Them"
"If you know music, you°ll know most everything you°ll need to know" Edgar Cayce
"You're only young forever" Harpo Marx
Fender 400, Fender FM212, G&L ASAT.
Was part of a hippie-Christian store in Cotati, California (circa 1976) called THE EYE OF THE RAINBOW. May God love you. |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 22 Mar 2015 4:50 am
|
|
My home-built S12 has 3/8" spacing by accident and I don't care for it, having got used to the 11/32" spacing on my old D10. When I was making the changer, sloppy thinking had me drill and tap the rear crossbar for the split tuners at 3/8" centres, thinking that they would be a near enough approximation to the 9mm spacing I got from using metric steel stock for the fingers. But it wasn't, so I made some thin washers to increase it.
I want to make a new crossbar as soon as I have time.
11/32" = 8.73mm
3/8" = 9.53mm
so a little light sanding of the parts should achieve 11/32, although 9mm is probably a good compromise spacing anyway. (We live in a strange twilight zone over here where steel is metric but brass and aluminium are still in inches.)
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
Charles Kurck
From:
Living in Arkansas but Heaven is home
|
Posted 22 Mar 2015 5:55 am
|
|
What many of us call spacing is actually the distance from center to center of the strings.
The distance between the strings is even less than the somewhat standard .34375†which is 11/32†at the changer.
Using common gauges of .036 and .038 on the E9th neck the distance between string 9 and 10 is only .30675 which is less than 5/16â€.
With a tapered neck the area where we pick is even less than that.
It seems to me that it would be feasible to make a changer that shims could be added between the fingers to equalize the spacing between the strings. |
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 22 Mar 2015 7:19 am
|
|
| Charles Kurck wrote: |
What many of us call spacing is actually the distance from center to center of the strings.
The distance between the strings is even less than the somewhat standard .34375†which is 11/32†at the changer.
Using common gauges of .036 and .038 on the E9th neck the distance between string 9 and 10 is only .30675 which is less than 5/16â€.
With a tapered neck the area where we pick is even less than that.
It seems to me that it would be feasible to make a changer that shims could be added between the fingers to equalize the spacing between the strings. |
While your proposal "might" be possible, it certainly isn't practical. Center to center spacing has been standard forever. Who wants to re-shim their changer (and nut roller) every time you change string gauges and/or tuning? |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 22 Mar 2015 8:16 am
|
|
Charles is correct in that what we call spacing should properly be called pitch - except in a musical context that would be confusing.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
Jamie Frost
From:
Spokane, WA
|
Posted 22 Mar 2015 11:26 am
|
|
| I'm with Dave Z, I really like it. The Sho-Bud built Fenders have this spacing as well. |
|
|
|
Charles Kurck
From:
Living in Arkansas but Heaven is home
|
Posted 23 Mar 2015 4:44 am
|
|
Jim Smith:
I do not suggest shimming a guitar to match changing string gauges.
My changer idea would be to use shims so that all the fingers could be the same size
but the changer block would have progressively wider centers.
This would be a onetime factory setup using common string gauges as a reference.
For a changer with supports between each finger shims would not be needed
because the changer could have builtin wider centers for the bass strings. |
|
|
|
Stephen Williams
From:
from Wales now in Berkeley,Ca, USA
|
Posted 23 Mar 2015 8:05 pm
|
|
| My home built guitar has 3/8" spacing and I like it a lot. The normal steel spacing seems way too tight for me. What was the reason the spacing is so tight? |
|
|
|
Jim Smith
From:
Midlothian, TX, USA
|
Posted 23 Mar 2015 9:55 pm
|
|
| Stephen Williams wrote: |
| My home built guitar has 3/8" spacing and I like it a lot. The normal steel spacing seems way too tight for me. What was the reason the spacing is so tight? |
I don't know for sure, but I always assumed that as more strings were added to the tuning, the spacing was reduced to help minimize the finger stretch between the top and bottom strings. |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 24 Mar 2015 4:35 am
|
|
From the history I've read, mostly on this forum, the crucial change seems to have been from eight strings to ten.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
chris ivey
From:
california (deceased)
|
Posted 24 Mar 2015 8:27 am
|
|
| i don't think i could tell if strings were 1/32 inch closer or wider..i'm comfy with the emmons spacing.....which actually seems narrower than my old sho-bud professional. |
|
|
|
Lee Dassow
From:
Jefferson, Georgia USA
|
Posted 24 Mar 2015 10:24 am
|
|
I wonder what the spacing is on the new Mullens.
I never thought to ask. T.L.
_________________
2015 Mullen D-10 Royal Precision 9x8,-1990 BMI S-10 5x5-1972 Silver face Fender pro Reverb amp,-1965 Fender Super Reverb Amp,- 1966 Fender Showman Amp Two 15" JBL speakers,- 2006 65 Fender Twin Reverb reissue Amp,- 1982 Peavey Session 500 amp,-1978 Peavey Session 400,Goodrich Volume Pedals,John Pearse Steel Bars, |
|
|
|
Richard Wilhelm
From:
Ventura County, California
|
Posted 24 Mar 2015 11:13 am
|
|
It`s amazing what 1/32" makes. You`ll adding 9/32", less than 1/3" total string width to a 10 string guitar. But to me, it`s the difference between awkwardly tight and just perfect.
_________________
"Be Kind to Animals, don't eat Them"
"If you know music, you°ll know most everything you°ll need to know" Edgar Cayce
"You're only young forever" Harpo Marx
Fender 400, Fender FM212, G&L ASAT.
Was part of a hippie-Christian store in Cotati, California (circa 1976) called THE EYE OF THE RAINBOW. May God love you. |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 26 Mar 2015 6:22 pm ttt
|
|
| tttt |
|
|
|
Don Chance
From:
North Texas, USA
|
Posted 26 Mar 2015 7:23 pm
|
|
Having PSG string spacing more like a dobro would really nice.
_________________
"Learn the rules like a pro, so you can break them like an artist." Pablo Picasso |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 27 Mar 2015 3:16 am
|
|
| Richard Wilhelm wrote: |
| It's amazing what 1/32" makes. |
I use four different trombone mouthpieces depending on which size of instrument I'm using. Their nominal inside diameters are 26.00mm, 25.73mm, 25.40mm, and 25.00mm.
The smallest increment is between the first two - works out at 0.011", a measurement we're all familiar with! The largest is still only 0.016". If I pick up the wrong one I know it as soon as I put it on my face - no need to blow. Why should not our fingers be just as sensitive?
[for reference, 1/32" = 0.031"]
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
Richard Wilhelm
From:
Ventura County, California
|
Posted 29 Mar 2015 3:10 pm
|
|
This post is for Jimmy Hudson. If you do go ahead and build a new pedal steel, you might also think of terms of improving the scale length. I play a Fender long scale 400 in which you can easily change the bridge position. I also play in Eb9, this is because I feel I get better tone and it keeps from breaking the high G# string on the 24 1/2" scale with the solid bridge (a little bicycle chain grease also helps). Another player on the Fender Steel Forum recently decresed his scale length to 24 3/16", also to reduce string breakage. I
followed suite and did the same thing, but I came to 24 7/32". I did this not to keep from breaking strings which I had solved, but to give the strings more resonence and better pick attack. Now I tried 24 3/16" (6/32") but the tone went from perfectly round and focused to muddy and unfocused. That 1/32" absolutely made a world of difference. There's that same number again. Keep in mind that the early Fender guitars have pickups of around 10 ohm impedance compared to the modern steel pickup of around.of around 17 ohm. I don't know if that makes a difference but this is all food for thought. Good luck.
_________________
"Be Kind to Animals, don't eat Them"
"If you know music, you°ll know most everything you°ll need to know" Edgar Cayce
"You're only young forever" Harpo Marx
Fender 400, Fender FM212, G&L ASAT.
Was part of a hippie-Christian store in Cotati, California (circa 1976) called THE EYE OF THE RAINBOW. May God love you. |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 30 Mar 2015 5:32 am tuning
|
|
| Richard Wilhelm wrote: |
This post is for Jimmy Hudson. If you do go ahead and build a new pedal steel, you might also think of terms of improving the scale length. I play a Fender long scale 400 in which you can easily change the bridge position. I also play in Eb9, this is because I feel I get better tone and it keeps from breaking the high G# string on the 24 1/2" scale with the solid bridge (a little bicycle chain grease also helps). Another player on the Fender Steel Forum recently decresed his scale length to 24 3/16", also to reduce string breakage. I
followed suite and did the same thing, but I came to 24 7/32". I did this not to keep from breaking strings which I had solved, but to give the strings more resonence and better pick attack. Now I tried 24 3/16" (6/32") but the tone went from perfectly round and focused to muddy and unfocused. That 1/32" absolutely made a world of difference. There's that same number again. Keep in mind that the early Fender guitars have pickups of around 10 ohm impedance compared to the modern steel pickup of around.of around 17 ohm. I don't know if that makes a difference but this is all food for thought. Good luck. |
I use a 24 inch scale and the pickups are in the 19 ohm range I have one of the guitars built. As soon as I get the photos I will post them. I like the 3/8 or .375 wide string spacing way better than the standard 10 string .312 to .340 spacing. |
|
|
|
Jimmie Hudson
From:
North Carolina, USA
|
Posted 30 Mar 2015 10:38 pm Photos of the Hudson 3/8 Wide string spacing guitar
|
|
The New Hudson 10 String 3/8 wide string spacing Pedal Steel guitar. Order your today.
Standard 3 floors and 4 knees, Pull Release Changer,
Real Maple Hardwood body neck and keyhead natural clear coat finish, Colors and stains Optional.
Standard E9th setup. Geoege L Eon Pickup is standard.
Base price starts at $995.00
Call for more information.
704-986-6481 8AM-9PM EST.
 |
|
|
|
Roger Shackelton
From:
MINNESOTA (deceased)
|
Posted 8 May 2015 7:28 pm
|
|
Does anyone have a sketch of a pull release changer?
I find it difficult to imagine how this design works. 
Roger |
|
|
|
