| Author |
Topic: Emmons PP pedals |
Tommy Detamore
From:
Floresville, Texas
|
Posted 18 May 2015 3:25 am |
|
I'm looking for a set of the narrower pedals typically found on mid-70's push pulls. Ideally I would like to find a complete set on a pedal rack but I realize that might be a tall order.
I can try to piece together a full set so if anybody has just one pedal they could part with please let me know what you have.
_________________
Tommy Detamore
Quilter Labs, Goodrich Sound, Source Audio, Neunaber Audio, and Stringjoy Authorized Dealer
www.cherryridgestudio.com
www.steelguitartracksonline.com
Last edited by Tommy Detamore on 18 May 2015 7:32 am; edited 1 time in total |
|
|
 |
Tommy Detamore
From:
Floresville, Texas
|
Posted 18 May 2015 7:31 am
|
|
I just wanted to add that I would also take a set of the wider pedals (1 3/8") if they came off a guitar with the narrow pedal spacing (2 3/8"). I could cut these pedals down to make them narrower.
This pedal arrangement is currently what I have on my guitar but I just hate to cut the original pedals, given the semi-historic nature of this particular PP 
I guess my feet are too wide 
_________________
Tommy Detamore
Quilter Labs, Goodrich Sound, Source Audio, Neunaber Audio, and Stringjoy Authorized Dealer
www.cherryridgestudio.com
www.steelguitartracksonline.com |
|
|
|
Herb Steiner
From:
Spicewood TX 78669
|
Posted 18 May 2015 2:51 pm
|
|
| Tommy Detamore wrote: |
I guess my feet are too wide |
Tommy, my man! Fats Waller told us all about it in this classic song
_________________
My rig: Infinity and Telonics.
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg? |
|
|
|
Tommy Detamore
From:
Floresville, Texas
|
Posted 18 May 2015 2:54 pm
|
|
Oh man Herbster I didn't think about that!
OK, I guess my feet's too big then. 
_________________
Tommy Detamore
Quilter Labs, Goodrich Sound, Source Audio, Neunaber Audio, and Stringjoy Authorized Dealer
www.cherryridgestudio.com
www.steelguitartracksonline.com |
|
|
|
Carl Kilmer
From:
East Central, Illinois
|
Posted 19 May 2015 12:56 pm
|
|
Hi Tommy, I have 6 Emmons pedals which were removed from my new D10
about 1980. Ron built me a D10 but I couldn't play C6 so I removed the C6.
These are black and 7/8" wide and and 7-1/4" long and have the mounting
brackets but you'd have to get some 8/32 screws to mount to the pedal bar.
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal |
|
|
|
Tommy Detamore
From:
Floresville, Texas
|
Posted 19 May 2015 1:21 pm
|
|
Thanks Carl. It sounds like maybe those are the black extruded aluminum (ie, "LeGrande style") pedals. I was hoping to find some of the spade type pedals in the narrower width. I think those are 1 1/8" wide or thereabouts.
_________________
Tommy Detamore
Quilter Labs, Goodrich Sound, Source Audio, Neunaber Audio, and Stringjoy Authorized Dealer
www.cherryridgestudio.com
www.steelguitartracksonline.com |
|
|
|
