Author |
Topic: Vibroclone, Traynor Mk III and Motion Sound Sidewinder Amps |
Lee Rider
From: Fort Bragg, California, USA
|
Posted 26 Jan 2015 10:02 pm
|
|
I have 3 amps for sale:
I built up a combo amp in a Vibroverb cabinet. Chassis is from a 50 watt early '70's Fender Bassman 10, exactly the same size as a Vibroverb and Bandmaster Reverb, so it fit perfectly in a new JD Newell finger jointed pine cabinet. I had the chassis totally gone through by the tech with new caps, biased, everything done. As it is a Bassman Ten chassis it has no vibrato or reverb; I use pedals for those effects. I put a JBL D-15S in the amp, the same speaker as a D-130 but this one was produced in the '70's for Sunn Amplifiers. I used this amp for pedal steel, lap steel and guitar. It is a great all-around amp for blues, rock or country. Plenty of head room and it sounds great with pedals. Two channels. Also has tilt-back legs. Excellent condition. $850
I have a '70's Traynor 100 watt head YGL-3 Mk III. Great amp, (4) EL34 power tubes, reverb, tremolo, 2 channels, like a Dual Showman Reverb. Built like a tank, good condition. $400
I also have a rare Motion Sound Sidewinder guitar amp with the rotary speaker. Motion Sound has not made these amps for quite a few years. It is a true rotary speaker amp, 100 watts, about 40 lbs with footswitch for speed and to stop the rotor, has internal 2 control reverb and sounds great. $650
Looking for a 12 string universal pedal steel, have cash or some trade stuff like above.
Last edited by Lee Rider on 4 Feb 2015 9:25 pm; edited 3 times in total |
|
|
|
Lee Rider
From: Fort Bragg, California, USA
|
Posted 29 Jan 2015 7:34 am
|
|
Updated description. |
|
|
|
Lee Rider
From: Fort Bragg, California, USA
|
Posted 30 Jan 2015 3:24 pm
|
|
bump |
|
|
|
Lee Rider
From: Fort Bragg, California, USA
|
Posted 4 Feb 2015 9:27 pm
|
|
ttt _________________ Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans SE200 with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
|
Lee Rider
From: Fort Bragg, California, USA
|
Posted 22 Feb 2015 10:02 pm
|
|
Still for sale, taking offers. _________________ Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans SE200 with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
|
Lee Rider
From: Fort Bragg, California, USA
|
Posted 22 Apr 2015 6:43 am
|
|
Sold the Traynor outside of the forum; still have the Vibroclone and Motion Sound. The Motion Sound Sidewinder has the built in Leslie speaker, sounds great with a pedal steel at 100 watts solid state with tube preamp. _________________ Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans SE200 with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
|
Lee Rider
From: Fort Bragg, California, USA
|
Posted 22 Apr 2015 6:44 am
|
|
Looking for a blackface Fender Showman amp head and can trade. _________________ Bowman SD10 push pull 3x5, Modified Hudson PedalBro, Sarno Tonic preamp, Evans SE200 with Altec 418B, Standel Custom 15, '67 Showman with D-130F in cabinet, Ganz Straight Ahead, custom Wolfe 6 string dobro, '52 Gibson Century 6. |
|
|
|
Tom Quinn
|
Posted 22 Apr 2015 8:35 am
|
|
That Traynor no doubt came from Emmett Ballard's shop back in the day. We sold a ton of those things out of Fort Bragg Music. _________________ I need an Emmons! |
|
|
|