Bob Carlucci
From:
Candor, New York, USA
|
Posted 20 Apr 2015 4:31 pm |
|
Wondering if any has any they could part with..
I just bought a nice S10 3 and 4, and had BIG plans on adding 2 pedals.. much easier said than done.. Our good friend Mike Yahl does have pedals, but he has side stud pedals, and mine has top stud pedals.. The pedals can be drilled and tapped, but the odd quick top mount quick connects are not readily available... The pedal rod pullers that connect the pedal rod to the 3/8 cross shaft are also not available.. Mike could modify something from another system, but then we are starting to run into "cob job" territory.. I Really thought I could get by with MSA stuff, but it looks like thats not going to be the right way to do this..
So I need- 2-Dekley top mount pedals, 2 top mount quick connects, 2 brackets that connect
the pedals to the pedal rack, 2 pedal rod pullers that connect the pedal rod to the cross shaft... anything else I need can be adapted from MSA parts, or made, but I would welcome OEM S10 cross shafts, cross shaft springs, bellcranks, pedal rods, changer pull rods, if I can get them... Any help would be greatly appreciated... I really would like to get this guitar made into a nice 5&4 if I can.. If I can't, I will most likely just sell it and buy the MSA I was looking for when I ran into this Dekley... MSA parts are easy to find, and sometimes that makes the difference between hanging in or bailing out... If you can part with some Dekley stuff, I would love to hear from you... please email me.
bullet_bob@lycos.com
_________________
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time...... |
|
