| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Better picks?
Goto page 1, 2  Next
Reply to topic
Author Topic:  Better picks?
Michael Behrent


From:
Wisconsin, USA
Post  Posted 3 Apr 2015 11:49 am    
Reply with quote

I've been using finger picks I got at Guitar Center but find them a bit uncomfortable. Can anyone recommend better ones?
View user's profile Send private message Send e-mail
Chase Brady


From:
Ohio, USA
Post  Posted 3 Apr 2015 12:02 pm    
Reply with quote

I use Old 97's
http://old97banjopick.com/

The big advantage is that they fit on your fingers behind the cuticle instead of right across it as most of the cheaper brands do. There are other good ones as well, I'm sure. Spending a little more to get picks that are comfortable is well worth it.
View user's profile Send private message Send e-mail
David Venzke


From:
SE Michigan, USA
Post  Posted 3 Apr 2015 12:49 pm    
Reply with quote

Michael,

You don't say which brand of picks you're currently using. And how long have you been playing with picks? I ask that question because for me it took about two years before I got over the "uncomfortable" feeling of wearing finger picks.

Now, having said that, the best recommendation I can give you (and I'm assuming you're using metal finger picks) is to spend 5-15 minutes with a good pair of needle nose pliers forming each pick to fit your finger like a glove. I have several different brands I wear/switch between and they are all "cuticle" length style, but making them fit well makes them comfortable for me (now that I'm used to wearing picks).

-Dave
View user's profile Send private message Send e-mail
Stefan Robertson


From:
Hertfordshire, UK
Post  Posted 3 Apr 2015 12:54 pm    
Reply with quote

I just switched over to silver nickel Dunlop thumb and fingerpicks as I didn't like the discrepancy between plastic and brass. HOWEVER until I get used to it the metal thumbpick sounds a bit scratchy. I'm assuming it will take a while. Very Happy

But once use to it I'll never have to worry either about replacing a worn out plastic thumbpick. BONUS
_________________
Stefan
Bill Hatcher custom 12 string Lap Steel Guitar
E13#9/F secrets: https://thelapsteelguitarist.wordpress.com

"Give it up for The Lap Steel Guitarist"
View user's profile Send private message Send e-mail Visit poster's website
Michael Behrent


From:
Wisconsin, USA
Post  Posted 3 Apr 2015 1:02 pm    
Reply with quote

I have to say the ones I have are cheapies. I even had to take a fine file to get rid of sharp spots. Never going to buy the cheap junk again. Thanks for the responses, those banjo picks look good.
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 3 Apr 2015 1:02 pm    
Reply with quote

I have never worn out a plastic thumbpick. Whoa!
View user's profile Send private message Send e-mail
Robert Allen

 

From:
Tennessee, USA
Post  Posted 3 Apr 2015 1:59 pm    
Reply with quote

I like the ProPik thumbpick because it has the ease of shaping metal but with a Delrin blade. The ProPik metal fingerpicks are contoured so they don't dig in around the fingernails. I buy them from Elderly. http://elderly.com/accessories/names/propik-nickel-thumbpick-with-delrin-tip--PK43D.htm
and http://elderly.com/search/elderly?terms=propik+fingerpicks&x=8&y=6

Bob
View user's profile Send private message Send e-mail Visit poster's website
Mike Neer


From:
NJ
Post  Posted 3 Apr 2015 2:04 pm    
Reply with quote

Dunlop .013s are my choice for electric. Comfort, tone, easily available and cheap.
_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Ken Campbell

 

From:
Ferndale, Montana
Post  Posted 3 Apr 2015 2:45 pm    
Reply with quote

Hoffmeyer picks are the bomb.

http://www.hoffmeyerpicks.com/HoffmeyerPicks/About_Hoffmeyer_Picks.html


Last edited by Ken Campbell on 4 Apr 2015 3:41 pm; edited 1 time in total
View user's profile Send private message Send e-mail
David Knutson


From:
Cowichan Valley, Canada
Post  Posted 3 Apr 2015 4:04 pm    
Reply with quote

I'm with Mike on the Dunlops. They are easy to shape to your fingers and they hold their shape. Great tone (I'm pretty much all Reso. these days) and they are everywhere. On the thumb I use a cut down white National. I trim that swooping point off to a nice, short triangle.
_________________
David K
View user's profile Send private message
Mike Neer


From:
NJ
Post  Posted 3 Apr 2015 4:13 pm    
Reply with quote

For thumbpicks, the Zookies are my all-time favorites.
_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 4 Apr 2015 7:20 am    
Reply with quote

My grandson broke my National thumb pick but I am very happy with a Golden Gate. For finger picks, I like the light gauge Dunlops, easy to shape to fit.
View user's profile Send private message Send e-mail
Michael Behrent


From:
Wisconsin, USA
Post  Posted 4 Apr 2015 10:50 am    
Reply with quote

Thanks guys. I picked up some Dunlop fingerpicks and a National thumbpick. Much better.
View user's profile Send private message Send e-mail
Steffen Gunter


From:
Munich, Germany
Post  Posted 4 Apr 2015 3:03 pm    
Reply with quote

I know that Dunlops were good enough for the best players including Jerry Byrd and Mike Neer.

But they really hurt on my fingers (OK, one member mentioned steel guitar is not for pussies). and I guess nowadays better picks are available. I checked out Perfect Touch – for me they are really better: they feel better, they stay on your fingers, they sound (!) better. I tried some other brands in the last months but I just love them …

Dunlop is my thumb pick brand.
View user's profile Send private message Send e-mail Visit poster's website
Chris Templeton


From:
The Green Mountain State
Post  Posted 4 Apr 2015 3:25 pm    
Reply with quote

Use needle nose pliers to shape them.
_________________
Excel 3/4 Pedal With An 8 String Hawaiian Neck, Sierra Tapper (10 string with a raised fretboard to fret with fingers), Single neck Fessenden 3/5
"The Tapper" : https://christophertempleton.bandcamp.com/album/the-tapper
Soundcloud Playlist: https://soundcloud.com/bluespruce8:
View user's profile Send private message
Jeff Au Hoy


From:
Honolulu, Hawai'i
Post  Posted 5 Apr 2015 4:24 pm    
Reply with quote

Steffen, whoever mentioned that is a goddamn idiot. Steel guitar is for everyone.

Dunlop 0.0225s are my favorite. Sometimes it takes a bit of bending (for me, flaring outwards the part of the pick where the finger enters) to prevent discomfort to the flesh near the cuticle.
View user's profile Send private message
Chris Templeton


From:
The Green Mountain State
Post  Posted 5 Apr 2015 5:18 pm    
Reply with quote

For me, if a fingerpick gauge is too light, I can't get enough "dig" without it flexing. I usually bend the tip upwards. The more the shaft is bent upwards the "slicker" the picking is. I believe Paul Franklin bends his about flush with his finger.
I used to have some no-name fingerpicks that were in an old lap steel case that were very heavy gauge and had a "bowl" to the shaft part. They were my favorites.
If you look at where your fingerpicks wear, I am guessing many of you will see the wear is on the edge of the shaft. The bowl shape kept picking smooth and avoided any unwanted grating noise caused by picking on the edge of the pick on a wound string. You could even try twisting the shaft counter clockwise a touch to aid in picking the string "head on".
_________________
Excel 3/4 Pedal With An 8 String Hawaiian Neck, Sierra Tapper (10 string with a raised fretboard to fret with fingers), Single neck Fessenden 3/5
"The Tapper" : https://christophertempleton.bandcamp.com/album/the-tapper
Soundcloud Playlist: https://soundcloud.com/bluespruce8:
View user's profile Send private message
Mike Neer


From:
NJ
Post  Posted 5 Apr 2015 6:16 pm    
Reply with quote

Talking about these, Chris?



_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
Chris Templeton


From:
The Green Mountain State
Post  Posted 5 Apr 2015 8:13 pm    
Reply with quote

YES!!!!! LOVE THE BOWL!!!! Thank you Mike. I wanna weep just looking at it.
_________________
Excel 3/4 Pedal With An 8 String Hawaiian Neck, Sierra Tapper (10 string with a raised fretboard to fret with fingers), Single neck Fessenden 3/5
"The Tapper" : https://christophertempleton.bandcamp.com/album/the-tapper
Soundcloud Playlist: https://soundcloud.com/bluespruce8:
View user's profile Send private message
Michael Behrent


From:
Wisconsin, USA
Post  Posted 5 Apr 2015 8:52 pm    
Reply with quote

I'm just getting started on lap steel and I have lots to learn. The forum is a great resource. I just ordered a big set of DVDs and CDs from Georgeboard on ebay and that should get me going pretty well. My finger picks are now Dunlop .018s and seem to do the job well, the fit still needs a little fine tuning but much better than the junk I had. Thanks to everyone for the advice and responses.
View user's profile Send private message Send e-mail
Mike Neer


From:
NJ
Post  Posted 6 Apr 2015 4:27 am    
Reply with quote

Chris Templeton wrote:
YES!!!!! LOVE THE BOWL!!!! Thank you Mike. I wanna weep just looking at it.


Chris, those picks are still manufactured: http://www.musicalinstrumenthaven.com/metal-finger-picks-2pack.aspx

They are definitely rigid and provide good tone. I tend to like the lighter picks, as I bend them to my finger tips and dig in to the strings for a wider variety of tones than I can get otherwise.

I used to use the .025 picks when I played tricone, but in switching to electric I realized I needed more of a "touch."
_________________
Links to streaming music, websites, YouTube: Links
View user's profile Send private message Send e-mail Visit poster's website
David Mason


From:
Cambridge, MD, USA
Post  Posted 6 Apr 2015 2:59 pm    
Reply with quote

ACRI's rule, dude.



They just flat out eliminate any of the usual complaints like "picks" hurt and "picks fall off." I have to shorten the blades and re-curve them a bit, but I have to fix most other picks, too. Janet Davis and Elderly music have them.
View user's profile Send private message Send e-mail
Bill Creller

 

From:
Saginaw, Michigan, USA (deceased)
Post  Posted 15 Apr 2015 7:36 pm    
Reply with quote

I've tried a lot of different picks, but always wound up with what I started with in the 40s..the National type...
View user's profile Send private message Send e-mail
Rich Gardner


From:
Columbus, Ohio, USA
Post  Posted 15 Apr 2015 10:27 pm    
Reply with quote

OK, Jeff. How about no swearing on the forum?
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 15 Apr 2015 11:50 pm    
Reply with quote

I use Kyser fingerpicks (copies of the old Nationals) and either Dunlop or National thumb picks.

Quote:
I have never worn out a plastic thumbpick.


Erv, I've worn out many thumbpicks in the past 45 years! When I played seven nights a week I wore out a thumbpick every two months. When I say wore out, I mean there was a deep gouge on the plastic blade of the pick from the wound strings and the tip of the blade was worn down quite a bit and the pick no longer held tight, but slipped around on my thumb.
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron